HRID1175198

反应详情

EQUATION

反应方程式

HRID 1175198 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

CONDITIONS

反应条件

温度
55 °C

PROCEDURE

实验过程

In a 250 mL round bottom flask equipped with mechanical stirrer, thermometer, nitrogen inlet and reflux condenser, 10.0 g of phthalic anhydride (0.067 moles) and 15 g of ionic liquid catalyst composition (zinc chloride and 1-butyl-3-methyl-imidazolium) (60 wt. % based on total weight of reactants) were charged to the round bottom flask followed by 14.3 g phenol (2.25 molar equivalents based on phthalic anhydride) and 1.9 g chlorosulphonic acid (0.2 molar equivalents based on phthalic anhydride), while maintaining the round bottom flask in a nitrogen atmosphere at 50 to 60° C. The reaction mixture was then heated with stirring at 120° C. (bath temperature). Over the course of the reaction (24 hours), the reaction mass progressively turned from orange to brownish orange to deep brown. After 24 hours, the reaction mixture comprising phenolphthalein was then quenched with 150 mL toluene. The viscous mass produced by the addition of toluene was stirred at 85° C. for about 30 min. The supernatant (containing the ionic liquid catalyst composition, toluene, and unreacted starting material) was decanted and the remaining viscous mass was then heated with 150 mL water and stirred at 85° C. for about 30 min. The solidified phenolphthalein was filtered while hot and washed until the supernatant was neutral with cold, distilled water to obtain crude phenolphthalein. The resulting brownish yellow solid was dried under vacuum at 100° C. overnight. The yield of crude phenolphthalein was 18.7 g (89 mol %) and the purity was 96.08 wt. %.

WORKUP

后处理

  1. customIn a 250 mL round bottom flask equipped with mechanical stirrer
  2. temperaturethermometer, nitrogen inlet and reflux condenser
  3. temperatureThe reaction mixture was then heated
  4. customOver the course of the reaction (24 hours)
  5. customthe reaction mixture comprising phenolphthalein was then quenched with 150 mL toluene
  6. customThe viscous mass produced by the addition of toluene
  7. stirringwas stirred at 85° C. for about 30 min
  8. customwas decanted
  9. temperaturethe remaining viscous mass was then heated with 150 mL water
  10. stirringstirred at 85° C. for about 30 min
  11. filtrationThe solidified phenolphthalein was filtered while hot and
  12. washwashed until the supernatant
  13. distillationdistilled water