참여 물질
| 역할 | 이름 | HCID | 투입량 |
|---|
| 반응물 | Sodium Chloride | HCID 5234 | — |
| 반응물 | Methyl iodide | HCID 6328 | — |
| 반응물 | Sodium Cyanide | HCID 8929 | — |
| 반응물 | Acetonitrile, fluoro- | HCID 10420 | — |
| 반응물 | Ammonium Chloride | HCID 25517 | — |
| 반응물 | ((3-Chloropropoxy)methyl)benzene | HCID 221505 | — |
| 반응물 | Magnesium | HCID 5462224 | — |
| 용매 | Water | HCID 962 | — |
| 용매 | Diethyl Ether | HCID 3283 | — |
| 생성물 | 2-Fluoromethyl-2-amino-5-benzyloxypentanenitrile | HCID 14771653 | 55,538% |
반응 단계
To magnesium turnings (30.6 g, 1.26 mol), suspended in dry ether (150 ml) is added methyl iodide (~ 0.5 ml) and then a solution of 1-chloro-3-benzyloxypropane (116 g, 0.63 mol) in ether (1.1l) at such a rate that gentle reflux is maintained. This procedure is performed under nitrogen. After the mixture is heated for 1 more hour under reflux, titration indicates Grignard formation to be complete. The solution is separated from the excess of magnesium (glass wool), transfered to a 6 l flask and, again under nitrogen, cooled to -40° C. Fluoroacetonitrile (33.48 g, 0.57 mmol) in ether (300 ml) is added slowly. The mixture is then kept at -40° C. for another 1/2 hour and is poured into a mixture of sodium cyanide (123 g), ammonium chloride (186 g), ice (600 g), and water (650 ml). The mixture is stirred vigorously and allowed to warm up to room temperature during 1 hour. Ether is added, the aqueous phase is saturated with sodium chloride, and the organic layer is separated. The aminonitrile is extracted with 1N HCl (2×750 ml) and re-extracted with ether (2×750 ml) after basification with concentrated ammonia. Drying (Na2SO4) and evaporation gives 2-fluoromethyl-2-amino-5-benzyloxypentanenitrile as a brown oil (74.8 g).
출처 및 근거
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| 특허 번호 | US04743691 |
|---|
| 출처 데이터셋 | uspto-grants-1988_05 |
|---|
| ORD ID | ord-2376f4fb4bb143f59cef7eca81b9c24e |
|---|
| 출처 메모 | uspto-grants-1988_05 |
|---|