Hydrochloric Acid → 2,2-Dipropylpentanoic acid

Participants

Reaction Steps

In a flask equipped with a dropping-funnel were placed 480 g of distilled dioxan followed by 80 g (0.432 mol) of tri-n-propylacetamide which was dissolved by stirring. For a period of 20 minutes a current of dry hydrochloric acid gas was passed through the dioxan solution at room-temperature, which represented a total of 100 g of hydrochloric acid gas. At the end of this operation, 88 g (0.86 mol) of freshly distilled butyl nitrile was slowly added over a period of 2 hours through the dropping-funnel. The temperature of the reaction medium rose from 31 to 43° C which necessitated cooling in a water-bath. The solution was then maintained for 2 hours at 85°-90° C. The dioxan was distilled off under a reduced pressure of 20 mm. Hg and a pasty residue obtained at room-temperature. This residue was dissolved in 290 g of a 10% aqueous solution of potassium hydroxide. The aqueous layer was decanted out and extracted twice with 75 g of ethyl ether. The potassium solution was acidified with 118 g of a 36% solution of hydrochloric acid (at 10/20° C) after which the oily phase was decanted out. The aqueous phase was extracted twice with 75 g of ethyl ether after which the oily phase and the ethereal extracts were placed together. The ethereal solution was washed twice with 100 g of water and dried for 24 hours over 100 g of anhydrous sodium sulphate. The sodium sulphate was then centrifuged out. The ethyl ether was distilled off under atmospheric pressure and the residue recuperated under 7 mm Hg. The fraction obtained boiled at 126° to 128° C and crystallized rapidly. In this way, 61 g of crude tri-n-propylacetic acid were obtained, which represents a yield of 76%. The crude product was then dissolved by heating in 75 g of ethyl ether. The ethereal solution was filtered while hot and the filtrate left at a temperature of -30° C for 4 hours. The precipitate which formed was centrifuged out and dried in a desiccator under a reduced pressure of 20 mm Hg for 6 hours. By this means, 46 g of pure tri-n-propylacetic acid were obtained which represents a yield in pure product of 75.4% and a total yield of 57.3%. M.P. 67° C.

Provenance & Evidence