Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 1290737Generated: October 30, 2026

Methane → HCID 178518651, compound

https://huagongshe.com/reaction/1290737

Reaction equation

Participants

RoleNameHCIDCharge
ReactantMethaneHCID 297—
ReactantIsoamyl NitriteHCID 8053—
ReactantSodium hydrideHCID 24758—
Reactant5H,10H-imidazo[1,2-a]indeno[1,2-e]pyrazin-4-oneHCID 10353549—
SolventAcetic AcidHCID 176—
SolventDimethyl SulfoxideHCID 679—
SolventWaterHCID 962—
SolventDimethylformamideHCID 6228—
ProductHCID 178518651HCID 17851865150.7%

Reaction Conditions

Temperature20 °C

Reaction Steps

0.4 g of 80% sodium hydride is added to a suspension of 1.1 g of 5H,10H-imidazo[1,2-a]indeno-[1,2-e]pyrazin-4-one in 10 ml of anhydrous dimethyl sulphoxide. After stirring for 10 minutes at a temperature in the region of 20° C., a solution of 0.7 g of isoamyl nitrite in 2 ml of anhydrous dimethyl sulphoxide is added dropwise over 5 minutes and the mixture is then stirred for 1 hour at the same temperature. 10 ml of distilled water are added slowly and the mixture is subsequently poured into 120 g of water and ice, acidified with 1 ml of acetic acid and then centrifuged. After removal of the supernatant solution, the solid is suspended in 25 ml of distilled water, filtered, washed with 10 ml of acetone and dried under reduced pressure (15 mmHg; 2 kPa) at 20° C. The product obtained (1.5 g) is dissolved in 100 ml of boiling dimethylformamide and, after 0.1 g of decolorizing charcoal has been added, the solution is filtered while hot, cooled, poured into 800 ml of distilled water and centrifuged. The solid is suspended in 20 ml of distilled water, filtered, washed with 20 ml of acetone and dried under reduced pressure (15 mmHg; 2 kPa) at 20° C. The product obtained (0.9 g) is dissolved in 75 ml of dimethyl sulphoxide at 20° C. and, after 0.1 g of decolorizing charcoal has been added, the solution is filtered. The filter is washed twice with 20 ml in total of dimethyl sulphoxide and the filtrate and the washings are then combined, 75 ml of distilled water are added and they are centrifuged. The solid is suspended in 25 ml of distilled water, filtered, washed twice with 50 ml in total of acetone and then dried under reduced pressure (1 mmHg; 0.13 kPa) at 60° C. 0.63 g of 10-(E-hydroxyimino)-5H,10H-imidazo[1,2-a]indeno[1,2-e]pyrazin-4-one is thus obtained, decomposing without melting above 300° C. [N.M.R. spectrum: (200 MHz; DMSO d6 ; δ in ppm): 7.40 and 7.48 (2t, J=7 Hz, 2H: --H7 and --H8); 7.60 and 8.00 (2s broad, 1H each: --H of the imidazole); 7.82 and 8.20 (2d, J=7 Hz, 1H each: --H6 and --H9); 12.70 and 13.00 (2 cplx, 1H each: --NH-- and --OH)].

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS05753657
Source datasetuspto-grants-1998_05
ORD IDord-855d87aaef5343b581892ec6e91bd358
Source noteuspto-grants-1998_05