戻る
化工社化工社 化学情報印刷レポート · 研究参考用
HRID 129909作成日:2026年10月27日

Pyrrole → Sodium pyrrolide

https://huagongshe.com/reaction/129909

反応式

関与物質

役割名称HCID仕込み量
反応物PyrroleHCID 8027—
反応物2,5-DimethylpyrroleHCID 12265—
反応物Sodium hydrideHCID 24758—
反応物Phosphoric acid, methyl esterHCID 83032—
反応物SodiumHCID 5360545—
反応物TriethylaluminumHCID 16682930—
溶媒MethanolHCID 887—
溶媒TetrahydrofuranHCID 8028—
溶媒1,2-DimethoxyethaneHCID 8071—
生成物Sodium pyrrolideHCID 10909487—
生成物Sodium 2,5-dimethylpyrrolideHCID 14591924—

反応手順

Manipulations of all reactants were carried out either in a drybox employing nitrogen, or in airless glassware employing vacuum or nitrogen. Tetrahydrofuran (THF), toluene, benzene, diethylbenzene (Aldrich, 97% mixture of 1,2-, 1,3-, 1,4- isomers) and pentane were purified by distillation over sodiumbenzophenone ketyl under nitrogen, then degassed via a nitrogen purge. Dimethoxyethane (DME) (Aldrich, anhydrous) was degasseal via nitrogen purge and used without further purification. Pyrrole (Aldrich, 98%) was vacuum distilled over sodium, then degassed via nitrogen purge. 2,5-Dimethylpyrrole was dried with calcium sulfate and vacuum distilled. Sodium 2,5-dimethylpyrrolide (NaC6H8N) was prepared by reacting 2,5-dimethylpyrrole with an excess of sodium (40% by weight dispersion in mineral spirits) in refluxing tetrahydrofuran under nitrogen. Sodium pyrrolide was prepared by reacting pyrrole with an equivalent molar amount (1:1) of NaH (Aldrich, 60% by weight in mineral oil) or sodium (40% dispersion by weight in mineral spirits) in dimethoxyethane or tetrahydrofuran (THF) at ambient temperature under nitrogen. Triethylaluminum (TEA) (Adrich 1.0M, hexanes and 1.9M toluene) was used as received. Ketjen Grade B alumina (Al2O3) and Davison 952 silica (SiO2) were the commercial materials used as supports for catalyst preparations. Fluorided-alumina (F/Al2O3, 15 wt % F) was prepared by the addition of a solution of NH4HF2 in methanol to Ketjen Grade B alumina. Phosphated silica (P/SiO2, P/Si molar ratio=0.1) was prepared by the addition of a 10% H3PO4 /methanol solution to Davison 952 silica. The aluminophosphate (AlPO4) used in the following experiments was made as described in McDaniel et al, U.S. Pat. No. 4,364,855 (1982). The supports were activated by placing up to 25 g into a fritted quartz tube, fluidizing with air and calcining at 700° C., except for P/SiO2 at 350° C., for 3 hours. The air stream was switched to nitrogen until the support cooled to ambient temperature.

情報源と証拠

DOI10.6084/m9.figshare.5104873.v1
特許番号US05470926
出典データセットuspto-grants-1995_11
ORD IDord-0c059e59f7584cd995af467204f76460
出典メモuspto-grants-1995_11