反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
CONDITIONS
反应条件
- 温度
- 85 °C
PROCEDURE
实验过程
Stir in a 3 neck 12 L round bottom flask 2-(4-chloro-2-nitro-phenylamino)-5-methyl-thiophene-3-carbonitrile (204.9 g, 0.6976 mol, 1 equiv), 3 A EtOH (2 L), and 6N HCl (2 L) for 10 min. Charge to the slurry in one portion, tin (II) chloride (404.1 g, 2.131 mol, 3.06 equiv) and heat to gentle reflux at 85° C. for 3 hours. HPLC at 3 hours shows <0.4% starting material. Allow mixture to cool and stir overnight. During the workup there is a possibility of tin salts precipitating with the product, did not cool as in lab trial, Workup includes: filtering reaction mixture, rinsing with ambient 1:1 3A EtOH/6N HCl (2×500 mL), rinsing with DI water (2×50 mL), drying in vacuum oven at 60° C. for 2 days. Wt.=231.5 g, and anaylsis. Discard some very small amount of precipitate which appears in the filtrate. Tin Removal in Hot 1 N HCl involves placing 231.5 g of the yellow crude product in 22 L flask, adding 1 N HCl (11.6 L), heating to 95° C. and holding at that temperature for 1 hour, shuting off heat and allowing to cool with heating mantle in place overnight. The next morning the temperature is 29° C. Remove mantle and replace with water bath and cool to 22° C. and filter. Rinse flask and add to cake with 1 N HCl (4 L) and follow by DI water (4 L). Pull air through the cake for 10 minutes, place in vacuum oven at 60° C. for 40 hours (Note: Only 1 gram of weight was lost over the final 16 hours of drying time.) Dry weight of title compound is 200.4 g (95.7%). Perform tin analysis. NMR is consistent with product. HPLC showed 98.5%.
WORKUP
后处理
- temperatureheat
- temperatureAllow mixture to cool
- customprecipitating with the product
- temperaturedid not cool as in lab trial, Workup
- filtrationfiltering
- customreaction mixture
- washrinsing with ambient 1:1 3A EtOH/6N HCl (2×500 mL)
- washrinsing with DI water (2×50 mL)
- customdrying in vacuum oven at 60° C. for 2 days
- customTin Removal in Hot 1 N HCl
- additionadding 1 N HCl (11.6 L)
- temperatureheating to 95° C.
- waitholding at that temperature for 1 hour
- temperatureheat
- temperatureto cool
- temperaturewith heating mantle in place overnight
- customis 29° C
- customRemove mantle
- customreplace with water bath
- temperaturecool to 22° C.
- filtrationfilter
- washRinse flask
- additionadd to cake with 1 N HCl (4 L)
- customfor 10 minutes
- waitplace in vacuum oven at 60° C. for 40 hours (Note
- custom16 hours
- customof drying time
- dry with material) Dry weight of title compound