反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
PROCEDURE
实验过程
2.98 lb of calcium stearate powder (Hydense 5862, obtained from Mallickrodt), 4.26 lb of Ethanox 330 powder, and 12.76 lb of GMS-40 powder were combined and tumble blended for 3 minutes to obtain a homogenous powder blend. This powder blend was processed with the pellet mill under essentially the same conditions/procedures of Example 1, except the powder feed rate to the pellet mill was bout 47 lb/hr and the die temperature ranged from about 42° C. to about 47° C. The output from the pellet mill consisted of 91.5.% by weight cylindrical pellets of nominally 3 mm diameter, the balance being −12 mesh fines. The pellets thus obtained exhibited good abrasion resistance and therefore would handle well in powder metering and conveying equipment.
WORKUP
后处理
- customto obtain a homogenous powder blend
- customranged from about 42° C. to about 47° C
- customThe pellets thus obtained