Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 1406831Generated: November 1, 2026

Water → HCID 178520928, compound

https://huagongshe.com/reaction/1406831

Reaction equation

Participants

RoleNameHCIDCharge
ReactantWaterHCID 962—
ReactantMethoxymethyl-triphenylphosphonium chlorideHCID 2723798—
Reactant4-(3,5-Difluorophenyl)cyclohexan-1-oneHCID 17790516—
ReactantPotassium tert-butoxideHCID 23665647—
SolventTetrahydrofuranHCID 8028—
ProductHCID 178520928HCID 17852092888.2%

Reaction Conditions

Temperature0 °C

Reaction Steps

In an argon atmosphere, 263 g of methoxymethyl triphenylphosphonium chloride was suspended in THF (800 mL), and 90 g of potassium-tert-butoxide was added the resultant suspension at an inside temperature of 0° C. or less, followed by stirring at an inside temperature of 0° C. for 20 minutes. Then, a solution of 4-(3,5-difluorophenyl)cyclohexanone (119 g) in THF (300 mL) was added at an inside temperature of 5° C. or less, followed by stirring at an inside temperature of −5 to 8° C. for 30 minutes. After water (10 mL) was added, the solvent was distilled off under reduced pressure, and water (400 mL), methanol (400 mL), hexane (500 mL), and 7.3 g of a 70% aqueous tert-butyl hydroperoxide solution were added to the residue, followed by stirring at room temperature for 1 hour. An organic layer was separated and an aqueous layer was subjected to extraction with hexane. The hexane extract was combined with the organic layer and washed with a 50% aqueous methanol solution and water two times in that order, and the solvent was distilled off under reduced pressure. Then, 10% hydrochloric acid (400 mL) and THF (400 mL) were added to the resultant residue, followed by heating under reflux for 1 hour. An organic layer was separated and an aqueous layer was subjected to extraction with ethyl acetate. The ethyl acetate extract was combined with the organic layer and washed with saturated brine two times. The solvent was distilled off under reduced pressure, and methanol (300 mL) and a 10% aqueous sodium hydroxide solution (20 mL) were added to the resultant residue, followed by stirring at 5° C. to −15° C. for 1 hour. The mixture was neutralized with 10% hydrochloric acid, and then water (300 mL), THF (200 mL), and ethyl acetate (400 mL) were added to the mixture. An organic layer was washed with saturated brine two times and then dried with anhydrous sodium sulfate. The solvent was distilled off under reduced pressure to yield 112 g of trans-4-(3,5-difluorophenyl)cyclohexane carbaldehyde as a light yellow oil.

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS08916718B2
Source datasetuspto-grants-2014_12
ORD IDord-7f39232b024849c7913e2cb3d7d36d81
Source noteuspto-grants-2014_12