Reaction Steps
Inside a nitrogen purged glove box, to a solution of 4-bromophenol (12.0 grams, 69.4 millimoles, 2.5 equivalents) dissolved in anhydrous 1-methyl-2-pyrrolidinone (100 milliliters), was added 95% sodium hydride (1.82 grams, 72.1 millimoles, 2.6 equivalents) in small portions over a 30 minute period. The reaction was stirred for an additional 90 minutes at room temperature. α,α-Dichlorotoluene (4.13 milliliters, 27.7 millimoles, 1.0 equivalent) was added and the reaction was heated to 70° C. overnight. The reaction was quenched by addition to water (200 milliliters). The aqueous phase was extracted with a 1:1 mixture of diethyl ether and ethyl acetate (3×120 milliliters). The combined organic phases were then washed with de-ionized water (5×100 milliliters), brine (1×100 milliliters) and dried over magnesium sulfate. After filtration and concentration on the rotary evaporator, the residue was taken up in diethyl ether (60 milliliters) and filtered through a plug of basic alumina. The product was fully eluted with additional diethyl ether (700 milliliters) and concentrated on the rotary evaporator. Further drying under high vacuum for several days yielded the product quantitatively in form of a yellow oil that crystallizes over time to give an off-white solid (12.0 grams, 27.7 millimoles, 100%). m.p.: 50.8° C.; 1H-NMR (400 MHz, CDCl3) δ 7.59-7.51 (m, 2H), 7.44-7.37 (m, 3H), 7.37-7.29 (m, 4H), 6.93-6.82 (m, 4H), 6.59 (s, 1H); 13C-NMR (101 MHz, CDCl3) δ 155.07, 136.58, 132.59, 129.65, 128.86, 126.78, 119.60, 115.42, 100.77; FTIR: 605, 658, 674, 694, 741, 792, 816, 848, 886, 928, 984, 1031, 1060, 1100, 1115, 1167, 1178, 1210, 1242, 1280, 1304, 1363, 1449, 1483, 1584, 1689, 3033, 3065 cm−1; UV/Vis 223 (shoulder), 237, 278 nm; GC/MS/EI+: 432, 434, 436 [M+] (2×Br isotope pattern); 261, 263 [Br—C6H4—O—CHPh]+ (1×Br isotope pattern); 182 [C6H4—O—CHPh]•+ HRMS (EST): calc. for C19H13Br2O2 [M+Na]+ 430.9288. found 430.9287.
