Epichlorohydrin → 2-{[(2-Octyldodecyl)oxy]methyl}oxirane

Participants

Reaction Conditions

Reaction Steps

The 2-octyldodecyl diglycerol ether emulsifier is prepared as follows. 2-Octyldodecyl glycidyl ether is prepared using the aliphatic glycidyl ether method described above. Approximately 360 g of epichlorohydrin is added to a stirred mixture of about 1.5 kg of 2-octyldodecanol (Jarcol I-20; Jarchem Industries) and about 10 g of stannic chloride. After the resulting exotherm heats the reaction mixture to about 70° C., the mixture is stirred under nitrogen for an additional about 6 hours at about 65° C. About 190 g of sodium hydroxide prediluted in approximately 280 g of distilled water is then added and reacted for about 6 hours at about 65° C. After separating the aqueous layer, the organic layer is water washed three times, heated to about 95° C., sparged with nitrogen to dry, and distilled in the range of about 185°-210° C. and <1 mm Hg to yield approximately 1.1 kg of 2-octyldodecyl glycidyl ether. Approximately 8.1 g of sodium methoxide (25% by weight in methanol) and approximately 1400 g of anhydrous glycerine are reacted together for about 3 hours under nitrogen at about 130° C. After heating the resulting mixture to about 185° C., the 2-octyldodecyl glycidyl ether is added dropwise over a period of about 2 hours. The resultant mixture is stirred for about 4 hours at about 185° C. under nitrogen and then allowed to cool without mixing. A glycerine layer settles to the bottom and is removed by siphoning. Volatiles are distilled from the remaining material by heating to about 150° C. at about 2 mm Hg, yielding approximately 1.3 kg of product. Approximately 700 g of the product is dissolved into an excess of mixed hexanes. This hexane phase is multiply extracted with 90:10 (v:v) methanol:water. The methanol:water extracts are combined and the solvent is removed using a rotary evaporator. The resulting residue is heated to about 70° C. and filtered through a glass microfiber filter, yielding approximately 380 g of 2-octyldodecyl diglycerol ether emulsifier. The product is analyzed by gel permeation chromatography and found to be about 82% diglycerol monoaliphatic ether and about 5% triglycerol dialiphatic ether. The product has a minimum interfacial tension of about 4.8 dyne/cm

Provenance & Evidence