Hydrogen Peroxide → HCID 43809304, compound

Participants

Reaction Conditions

Reaction Steps

To a 1000-mL 3-necked round bottom flask equipped with a 250-mL pressure equalizing addition funnel, a nitrogen inlet with thermocouple and an overhead stirrer was added 172 mL (1.72 mol) of a 10M solution of BH3—Me2S in tetrahydrofuran and 300 mL of dry tetrahydrofuran. The addition funnel was charged with 116.8 g (1.72 mol) of cyclopentadiene dissolved in 100 mL of dry tetrahydrofuran. The flask was immersed in an ice-water bath and the cyclopentadiene solution slowly added over 2 hours at 0-5° C. Stirring was continued for an additional 90 min at this temperature at which time 130 mL of methanol was cautiously added over 1 hour with vigorous evolution of hydrogen. The solvent was then removed under reduced pressure and the remaining oil transferred to a 5 L 3-necked round bottom flask equipped with a thermocouple inlet, overhead stirrer and a 500-mL addition funnel. Dichloromethane (2 L) and water (500 mL) were added and the mixture cooled to 5° C. The addition funnel was charged with 100 mL (1.95 mol) of bromine which was then added slowly over 1 hr. The resulting dark mixture was exposed to a long wave UV lamp with stirring at room temperature overnight by which time the bromine color had largely disappeared. The reaction mixture was recooled to 5° C. and 1.3 L of 6N NaOH was added slowly via the addition funnel followed by 400 mL of 30% hydrogen peroxide. After stirring overnight at room temperature the organic layer was separated, washed several times with water, once with brine and then dried over anhydrous magnesium sulfate for 1 hour. Filtration and removal of the solvent at reduced pressure resulted in a light-colored oil which was distilled from Na2CO3 through a short Vigreux (bp 63° C. @ 1 mmHg) to yield 72 g (55%) the title alcohol as a clear, colorless oil.

Provenance & Evidence