Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 1471113Generated: October 29, 2026

Trifluoroacetic anhydride → (S)-tert-butyl 2-((tert-butyldiphenylsilyloxy)methyl)-2,3-dihydro-1H-pyrrole-1-carboxylate

https://huagongshe.com/reaction/1471113

Reaction equation

Participants

RoleNameHCIDCharge
ReactantTrifluoroacetic anhydrideHCID 9845—
ReactantDiisopropylethylamineHCID 81531—
Reactant(S)-tert-Butyl 2-(((tert-butyldiphenylsilyl)oxy)methyl)-5-oxopyrrolidine-1-carboxylateHCID 11762195—
ReactantLithiumtriethylborohydrideHCID 23664628—
Catalyst4-(Dimethylamino)pyridineHCID 14284—
SolventTolueneHCID 1140—
Product(S)-tert-butyl 2-((tert-butyldiphenylsilyloxy)methyl)-2,3-dihydro-1H-pyrrole-1-carboxylateHCID 1300851682%

Reaction Steps

A three-necked flask equipped with a thermometer and a nitrogen inlet was charged with (S)-tert-butyl 2-((tert-butyldiphenylsilyloxy)methyl)-5-oxopyrrolidine-1-carboxylate (10.05 g, 22.16 mmol) and toluene (36 mL) and lowered into −55° C. cooling bath. When the internal temperature of the mixture reached −50° C., lithium triethylborohydride (23 mL of 1.0 M/THF, 23 mmol) was added dropwise over 30 min and the mixture stirred for 35 min while maintaining the internal temperature between −50° C. and −45° C. Hunig's base (16.5 mL, 94 mmol) was added dropwise over 10 min. Then, DMAP (34 mg, 0.278 mmol) was added in one batch, followed by the addition of trifluoroacetic anhydride (3.6 mL, 25.5 mmol) over 15 min, while maintaining the internal temperature between −50° C. and −45° C. The bath was removed 10 min later and the reaction mixture was stirred for 14 h while allowing it to rise to ambient temperature. The reaction mixture was diluted with toluene (15 mL), cooled with an ice-water bath and treated slowly with water (55 mL) over 5 min. The phases were separated and the organic layer washed with water (50 mL, 2×) and concentrated in vacuo. The crude material was purified by flash chromatography (silica gel; 5% EtOAc/hexanes) to afford (S)-tert-butyl 2-((tert-butyldiphenylsilyloxy)methyl)-2,3-dihydro-1H-pyrrole-1-carboxylate (7.947 g, 82% yield) as a colorless viscous oil. LC/MS: [M+Na]+=460.19. Rt=2.41 min under the following HPLC conditions: Solvent gradient from 100% A:0% B to 0% A:100% B (A=0.1% TFA in 1:9 MeOH/water; B=0.1% TFA in 9:1 MeOH/water) over 2 min and hold for 1 min; detection at 220 nm; PHENOMENEX®Luna 3.0×50 mm S10 column. 1H NMR (400 MHz, DMSO-d6) δ ppm 7.62-7.58 (m, 4H), 7.49-7.40 (m, 6H), 6.47 (br s, 1H), 5.07/5.01 (overlapping br d, 1H), 4.18 (br s, 1H), 3.89 (br s, 0.5H), 3.69 (br s, 1.5H), 2.90-2.58 (br m, 2H), 1.40/1.26 (overlapping br s, 9H), 0.98 (s, 9H).

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS09006455B2
Source datasetuspto-grants-2015_04
ORD IDord-ccaaef98a4724b29bcb76b28cb489f10
Source noteuspto-grants-2015_04