Reaction Steps
A RBF was charged with 1-(4-bromo-5-fluoro-2-methoxyphenyl)-N-(isoxazol-3-yl)-2-oxo-1,2-dihydroquinoline-6-sulfonamide (272 mg, 0.550 mmol), (3,5-difluorophenyl)boronic acid (130 mg, 0.825 mmol), potassium carbonate (228 mg, 1.651 mmol), and Pd(Ph3P)4 (63.6 mg, 0.055 mmol). The vial was sealed with a septum cap and flushed with N2 (g), then Dioxane (2064 μl) and Water (688 μl) were added via syringe. The mixture was heated at 90° C. for 40 min. The mixture was diluted with HCl (8 mL, 1M aq) then extracted with EtOAc (2×20 mL). The organic layers were combined and concentrated. The residue was absorbed onto a plug of silica gel and purified by chromatography through a Redi-Sep pre-packed silica gel column (12 g), eluting with a gradient of 0%-3% MeOH in DCM, to provide N-(isoxazol-3-yl)-2-oxo-1-(2,3′,5′-trifluoro-5-methoxy-[1,1′-biphenyl]-4-yl)-1,2-dihydroquinoline-6-sulfonamide. The racemic N-(isoxazol-3-yl)-2-oxo-1-(2,3′,5′-trifluoro-5-methoxy-[1,1′-biphenyl]-4-yl)-1,2-dihydroquinoline-6-sulfonamide was subjected to chiral separation by SFC on an AS-H column (25% MeOH/75% CO2) to give (P)—N-(isoxazol-3-yl)-2-oxo-1-(2,3′,5′-trifluoro-5-methoxy-[1,1′-biphenyl]-4-yl)-1,2-dihydroquinoline-6-sulfonamide as peak 1 and (M)-N-(isoxazol-3-yl)-2-oxo-1-(2,3′,5′-trifluoro-5-methoxy-[1,1′-biphenyl]-4-yl)-1,2-dihydroquinoline-6-sulfonamide as peak 2. Data for peak 1: 1H NMR (500 MHz, DMSO-d6) δ 11.65 (br. s., 1H), 8.72 (d, J=1.66 Hz, 1H), 8.38 (d, J=1.98 Hz, 1H), 8.16-8.31 (m, 1H), 7.86 (dd, J=2.08, 8.98 Hz, 1H), 7.56 (d, J=10.47 Hz, 1H), 7.47 (t, J=6.79 Hz, 3H), 7.33-7.43 (m, 1H), 6.84-6.91 (m, 1H), 6.77-6.84 (m, 1H), 6.41-6.49 (m, 1H), 3.70-3.83 (s, 3H). m/z (ESI) 528.0 (M+H)+. Data for peak 2: 1H NMR (500 MHz, DMSO-d6) δ 11.65 (br. s., 1H), 8.72 (d, J=1.66 Hz, 1H), 8.38 (d, J=1.98 Hz, 1H), 8.16-8.31 (m, 1H), 7.86 (dd, J=2.08, 8.98 Hz, 1H), 7.56 (d, J=10.47 Hz, 1H), 7.47 (t, J=6.79 Hz, 3H), 7.33-7.43 (m, 1H), 6.84-6.91 (m, 1H), 6.77-6.84 (m, 1H), 6.41-6.49 (m, 1H), 3.70-3.83 (s, 3H). m/z (ESI) 528.0 (M+H)+.
