N,N-Dimethylaniline → HCID 68131471, compound

HRID 1576371Notes

Reaction equation

HRID 1576371 reaction equation
[CH3:1][N:2]([CH3:9])[C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[S:10](=[O:13])([OH:12])[OH:11].S(=O)(=O)(O)O.S([O-])([O-])(=O)=O.[NH4+].[NH4+]>>[S:10]([OH:13])([OH:12])=[O:11].[CH3:1][N:2]([CH3:9])[C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1

Participants

5

Procedure

The SO2 -lean and dimethylaniline-enriched effluent gas from absorber section 5 of tower 6 which contains about 0.15% by volume SO2 and about 800-900 p.p.m. of gaseous dimethylaniline, passes upwardly sequentially through sulfurous acid scrubbing section 9 and sulfuric acid scrubbing section 10. A tail gas containing 0.05% by volume SO2 and virtually free of gaseous dimethylaniline is withdrawn from sulfuric acid scrubbing section 10 through line 18. Substantially pure SO2 gas bled off the upper SO2 gas-containing space in liquefied SO2 surge tank 59 and aqueous ammonium sulfate solution withdrawn from the lower portion of regenerator section 33 of tower 31 are separately supplied into scrubbing section 9 through lines 19 and 20 respectively. The SO2 gas is supplied into the lower portion of scrubber section 9 below the lowermost tray therein through line 19 at a flow rate of 30 SCFM (dry) and at a temperature of 80°F. The liquid aqueous ammonium sulfate solution is pumped into the upper portion of scrubbing section 9 above the uppermost tray therein through line 20 at a temperature of 80°F. and a flow rate of 26 g.p.m. and at flow rates of ammonium sulfate and water contained therein of 13.0 lbs/minute and 208 lbs/minute respectively. Water is supplied into scrubbing section 9 through line 22 at a flow rate of 61/2 g.p.m. The uprising SO2 gas in scrubbing section 9 is dissolved in and reacts with the water of the downwardly flowing aqueous ammonium sulfate to form in scrubbing section 9 a dilute sulfurous acid-and ammonium sulfate-containing aqueous solution. A major portion, i.e. more than 50%, of the gaseous dimethylaniline present in the gas is removed from the gas in scrubbing section 9 by reaction with the sulfurous acid in the presence of the ammonium sulfate to form dimethylaniline sulfite. The aqueous sulfurous acid-and ammonium sulfate-containing scrubbing solution also containing the thus-formed dimethylaniline sulfite is withdrawn from the lowermost tray in scrubber section 9 through line 62 at a temperature of 80°F. and passed at flow rates of SO2, SO4 and dimethylaniline contained therein of 5.0 lbs/minute, 0.6 lb/minute and 8.6 lbs/minute respectively to collection tank 63. The uprising effluent gas leaving scrubbing section 9 contains, by volume, about 60 to 80 p.p.m. of residual gaseous dimethylaniline and about 0.07 - 0.10% SO2, and this gas enters and passes upwardly within sulfuric acid scrubbing section 10. Dilute sulfuric acid aqueous solution of 10% sulfuric acid concentration is supplied at a flow rate of 0.4 g.p.m. and at ambient temperature into the sulfuric acid scrubbing section 10 above the uppermost tray therein. Substantially all of the residual dimethylaniline is removed from the gas in scrubbing section 10 by reaction with the sulfuric acid of the dilute sulfuric acid solution to form dimethylaniline sulfate. Liquid sulfuric acid solution containing a relatively high concentration of dimethylaniline sulfate is withdrawn from the lowermost tray n scrubbing section 10 at a temperature of 80°F. and passed through line 64 at a flow rate of 16.4 g.p.m. and at flow rates of dimethylaniline, H2SO4 and water contained therein of 41 lbs/minute, 15.6 lbs/minute and 141.2 lbs/minute respectively to recycle tank 65. A major portion of the dilute aqueous sulfuric acid solution containing the dimethylaniline sulfate in tank 65 is withdrawn from a lower portion of tank 65 and pumped at a temperature of 80°F. and at a flow rate of 16 g.p.m. as recycle scrubbing solution through line 68 and introduced into scrubber section 10 onto the fourth tray therein. Liquid sulfuric acid solution containing a relatively low concentration of dimethylaniline sulfate is withdrawn from the third tray from the top of scrubber section 10 and pumped at a temperature of 80°F. and a flow rate of 15 g.p.m. as recycle scrubber solution through lines 69 and 70 and introduced onto the top tray of scrubber section 10.

Workup

  1. additionA tail gas containing 0.05% by volume SO2
  2. customvirtually free of gaseous dimethylaniline is withdrawn from sulfuric acid scrubbing section 10 through line 18
  3. customwithdrawn from the lower portion of regenerator section 33 of tower 31
  4. dry with materialthrough line 19 at a flow rate of 30 SCFM (dry)
  5. customat a temperature of 80°F
  6. customat a temperature of 80°F.
  7. dissolutionThe uprising SO2 gas in scrubbing section 9 is dissolved in and
  8. customreacts with the water of the downwardly flowing aqueous ammonium sulfate
  9. customto form
  10. additioncontaining aqueous solution
  11. customA major portion, i.e. more than 50%, of the gaseous dimethylaniline present in the gas is removed from the gas in scrubbing section 9 by reaction with the sulfurous acid in the presence of the ammonium sulfate

Sources & evidence

ORD record
ord-853b2668292349bcbd1f78ff846adf59
Source dataset
uspto-grants-1976_09
Patent number
US03980760

Reaction notes

Loading…