Sodium Hydroxide → Sodium pyrosilicate

400 g of a commercially available water glass solution having an SiO2 :Na2O ratio of 2:1 and a solids content of 45% by weight, prepared by hydrothermal digestion of sand with sodium hydroxide solution, were dehydrated in a laboratory hot-air spray tower (inlet temperature 220° C., outlet gas temperature 120° C.) to give an amorphous sodium disilicate having an ignition loss of 16.8% by weight at 620° C. 8 g of the amorphous sodium disilicate were then heat-treated for 1 h in a muffle furnace at 620° C. and then rapidly cooled. The X-ray reflections (position and intensity) required for the phase calculation are given in Table 1. According to the above formulae, the percentage distribution among the crystalline phases is:

1. customwere dehydrated in a laboratory hot-air spray tower (inlet temperature 220° C., outlet gas temperature 120° C.)

ORD record

ord-810f3a9bda174c24a9db7e8bf589146f

Source dataset

uspto-grants-2000_03

DOI

10.6084/m9.figshare.5104873.v1

Patent number

US06036733