Zurück
HuagongsheHuagongshe Chemie-Druckbericht · Nur für Forschungszwecke
HRID 1649421Erstellt: 25. Oktober 2026

Phosphoric Acid → 8-methanesulfonyloxy-6,7-dihydro-1-oxo-1H,5H-benzo[ij]quinolizine-2-carboxylic acid

https://huagongshe.com/reaction/1649421

Reaktionsgleichung

Beteiligte Stoffe

RolleNameHCIDEinwaage
EduktPhosphoric AcidHCID 1004—
EduktSodium HydroxideHCID 14798—
EduktPhosphorus oxide (P4O10)HCID 14812—
Edukt5-Methanesulfonyloxy-1,2,3,4-tetrahydroquinolineHCID 12899678—
Edukt3-Ethoxy-2-ethoxycarbonylprop-2-enoateHCID 85829211—
LösungsmittelEthanolHCID 702—
LösungsmittelWaterHCID 962—
Produkt8-methanesulfonyloxy-6,7-dihydro-1-oxo-1H,5H-benzo[ij]quinolizine-2-carboxylic acidHCID 1289968066,8%

Reaktionsbedingungen

Temperatur110 °C

Reaktionsschritte

21.6 g of ethyl ethoxymethylenemalonate was added to 22.4 g of 5-methanesulfonyloxy-1,2,3,4-tetrahydroquinoline and the mixture was heated at 110° C. on an oil bath for 30 minutes while stirring, during which time distillation of ethanol was observed. After heating, 240 g of polyphosphoric acid prepared from 120 g of phosphoric acid and 120 g of phosphorus pentoxide was added to the mixture and the mixture was allowed to react on an oil bath at 140° C. for 45 minutes. After completion of the reaction, the mixture was allowed to cool to room temperature and poured into 400 ml of water, followed by rendering the mixture neutral with a 40% aqueous sodium hydroxide solution to precipitate crystals. The crystals thus-obtained were mixed with 150 ml of a 10% aqueous sodium hydroxide solution and the mixture was heat refluxed for 40 minutes during which time the crystals were dissolved to form a uniform solution. The solution was treated with activated carbon while hot and filtered. The filtrate was allowed to cool and adjusted to a pH of 2 to precipitate crystals which were filtered. Recrystallization of the crude crystals thus-obtained from dimethylformamide gave 21.3 g of 8-methanesulfonyloxy-6,7-dihydro-1-oxo-1H,5H-benzo[ij]quinolizine-2-carboxylic acid as white needles having a melting point of 270° to 275° C.

Herkunft & Nachweise

DOI10.6084/m9.figshare.5104873.v1
PatentnummerUS04416884
Quelldatensatzuspto-grants-1983_11
ORD IDord-e61b0ba1fdcf4b35b91466be3cf707b5
Quellennotizuspto-grants-1983_11