Methane → (2R)-1-[3-(2-{[2-(2-dimethylaminoethoxy)-3-pyridinyl]oxy}ethoxy)-2-pyrazinyl]-2-methylpiperazine

참여 물질

반응 조건

반응 단계

(2R)-1-(3-chloro-2-pyrazinyl)-2-methylpiperazine (20 L in toluene solution; see Example 8 for preparation) and active charcoal (201 g) was added to the 328 L-reactor containing 2-{[2-(2-dimethylaminoethoxy)-3-pyridinyl]oxy}ethanol (Example 1C) in toluene solution. The mixture was stirred for 25 minutes before transferred to a through a GAF-filter (containing a Teflon filter bag) to a 250 L-stainless steel reactor. The mixture was heated to 100° C. before the prepared “THF/potassium tert-butoxide-solution” was added to the reactor using a SOL addition bowl. After 10 L “THF/potassium tert-butoxide-solution” was added, an IP-HPLC was taken to ensure that the title compound had started to form. The total addition of THF/potassium tert-butoxide-solution was made during 2 h and 15 minutes. Water (21 L) and sodium chloride (1 kg) was added to a 198 L-glasslined reactor. The salt was dissolved before the reaction mixture was transferred from the 328 L-reactor and quenched into the 198 L-reactor. Toluene (10 L) was also transferred to make sure that no reaction-mixture was left in the hoses used for the transfer. The mixture was then heated to 70° C. before the mechanical stirrer was turned off. The phases were allowed to separate for 30 minutes before the water phase (25 L) was discharged. The mixture was heated to reflux and toluene (10 L) was distilled off. Water (100 L) was added and the mixture was heated to reflux again and 60 L of water was distilled off. The remaining solution was then cooled to RT. The title compound was never isolated; it was directly used in the next step (Example 3C). IP sample (HPLC) of the toluene mixture confirmed the retention time for the desired product (tret=2.2 minutes).

출처 및 근거