HRID1694574

反应详情

EQUATION

反应方程式

HRID 1694574 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

PROCEDURE

实验过程

To a 5 L flask equipped with a mechanical stirrer and an internal temperature probe were added (R)-tert-butyl 3-(isoquinolin-5-ylamino)pyrrolidine-1-carboxylate dibenzoyl-D-tartaric acid salt (180 g, 0.27 mol, from Example 2) and 2.7 L of isopropyl acetate. The suspension was stirred while 630 mL of 1N sodium hydroxide was added maintaining an internal reaction temperature below 30° C. Stirring was continued until a biphasic solution was obtained. The aqueous layer was removed and the remaining organic layer was washed with 1N sodium hydroxide (360 mL) and water (360 mL). Five normal HCl (215 mL) was added and the reaction was stirred until all (R)-tert-butyl 3-(isoquinolin-5-ylamino)pyrrolidine-1-carboxylate was consumed. The pH of the reaction was adjusted to >12 with 270 mL of 5N sodium hydroxide. The layers were separated. The pH of the aqueous layer was adjusted to >12 with 50 mL 5 N NaOH. The aqueous layer was re-extracted with 1.5 L of isopropyl acetate. The combined organic layers were concentrated to a volume of 770 mL.

WORKUP

后处理

  1. customTo a 5 L flask equipped with a mechanical stirrer
  2. additionwas added
  3. temperaturemaintaining an internal reaction temperature below 30° C
  4. customwas obtained
  5. customThe aqueous layer was removed
  6. washthe remaining organic layer was washed with 1N sodium hydroxide (360 mL) and water (360 mL)
  7. additionFive normal HCl (215 mL) was added
  8. stirringthe reaction was stirred until all (R)-tert-butyl 3-(isoquinolin-5-ylamino)pyrrolidine-1-carboxylate
  9. customwas consumed
  10. customThe layers were separated
  11. extractionThe aqueous layer was re-extracted with 1.5 L of isopropyl acetate
  12. concentrationThe combined organic layers were concentrated to a volume of 770 mL