Acrylic Acid → HCID 86651404, compound

Participants

Reaction Conditions

Reaction Steps

360.0 g of methyl ethyl ketone was placed in a 2 L three-necked flask equipped with a stirrer, a thermometer, a reflux condenser, and a nitrogen gas introduction tube, and was heated to 75° C. Thereafter, while the temperature inside the flask was maintained at 75° C., a mixture solution of 172.8 g of phenoxyethyl acrylate, 115.2 g of benzyl acrylate, 54.0 g of methyl methacrylate, 18.0 g of acrylic acid, 72 g of methyl ethyl ketone, and 1.44 g of V-601 (tradename, manufactured by Wako Pure Chemical Industries Ltd.) was added dropwise into the flask at a constant rate such that the dropwise addition was completed in 2 hours. After the dropwise addition was completed, a solution of 0.72 g of V-601 in 36.0 g of methyl ethyl ketone was added into the flask, stirred at 75° C. for 2 hours, and a solution of 0.72 g of V-601 in 36.0 g of isopropanol was further added, and the contents of the flask were stirred at 75° C. for 2 hours. Then, the temperature was increased to 85° C., and stirring was continued for another 2 hours. As a result, a resin solution of a copolymer of phenoxyethyl acrylate/benzyl acrylate/methyl methacrylate/acrylic acid (in a ratio of 48/32/15/5 by mass) was obtained.

Provenance & Evidence