Reaction Steps
To a solution of 6-iodo-3-styryl-1-[2-(trimethyl-silanyl)-ethoxymethyl]-1H-indazole, prepared in Example 14, step (i), (330 mg, 0.693 mmol) in THF (3.0 mL) at −78° C. was added n-butyllithium (0.56 mL, 1.5 M, 1.2 equiv). After 20 min, this solution was then added to anhydrous zinc chloride (170 mg) and the mixture was warmed to 23° C. and stirred for 15 min. To this mixture was added 1-(3-nitro-phenyl)vinyltriflate (146 μL, 1.05 equiv) and Pd(PPh3)4 (40 mg, 0.05 equiv). This mixture was stirred for 30 min, was partitioned between ethyl acetate and saturated sodium bicarbonate and the organic layer was separated. The organic material was dried over sodium sulfate, decanted and concentrated under reduced pressure. Purification by silica gel chromatography (1:9 ethyl acetate-hexane) then a second column (1% ethyl acetate/benzene) gave 6-(1-(3-nitrophenyl)vinyl)-3-styryl-1-[2-(trimethyl-silanyl)-ethoxymethyl]-1H-indazole as an oil (180 mg, 52%): FTIR (thin film) 2951, 1616, 1530, 1477, 1448, 1348, 1305, 1248, 1217, 1077, 961, 913, 859 cm−1; 1H NMR (300 MHz, CDCl3) δ 8.26 (t, 1H, J=1.9 Hz), 8.21 (m, 1H), 8.00 (d, 1H, J=8.5 Hz), 7.69 (dt, 1H, J=1.4, 7.8), 7.62-7.28 (m, 9H), 7.19 (dd, 1H, J=1.4, 8.4 Hz), 5.72 (s, 3H), 5.69 (s, 1H), 3.60 (t, 2H, J=8.2 Hz), 0.89 (t, 2H, J=8.2 Hz), −0.05 (s, 9H); 13C NMR (75 MHz, CDCl3) δ 149.9, 149.6, 144.7, 144.5, 142.8, 140.7, 138.6, 135.6, 133.1, 130.7, 130.2, 129.4, 128.0, 124.4, 124.2, 124.1, 123.8, 122.6, 121.2, 118.9, 111.0, 79.2, 68.0, 19.2, 0.0; HRMS (FAB) [M+Na]/z Calc'd 520.2031, found 520.2046.
