反应详情

Under the nitrogen gas atmosphere, chloro sulfuric acid is diluted by adding chloro sulfuric acid (0.53 ml, 8 eq.) into methylene chloride (10 ml), and 1,1′:4′,1″-terphenyl (0.230 g, 1.0 mmol) is added gradually into a container in which diluted chloro sulfuric acid is contained keeping the temperature at 0° C., then stirred at the room temperature for 6 hours. The obtained reacted mixture is poured into brine, and deposited white insoluble is removed by suction filtration. Since the small amount of product is possible to be remained, the residue is washed well by methylene chloride. Then, this solution and the extracted solution are dried up using magnesium sulfate. Solvent is vaporized off under the vacuum condition, and the impurity is removed from the obtained crude product by isolating by a column chromatography (φ=50 mm, h=100 mm; CHCl3). Thus, 4,4″-dichlorosulfonyl1,1′:4′,1″-terphenyl (0.288 g, 0.67 mmol, 67%) is obtained as a colorless crystal (compound F).

1. customat 0° C.
2. customThe obtained reacted mixture
3. customdeposited white insoluble is removed by suction filtration
4. washthe residue is washed well by methylene chloride
5. customThen, this solution and the extracted solution are dried up
6. customthe impurity is removed from the
7. customobtained crude product