Reaction Steps
9-Bromo-2-(2-isopropyl-2H-[1,2,4]triazol-3-yl)-4,5-dihydro-6-oxa-3-thia-1-aza-benzo[e]azulene from Example 6 (0.350 g, 0.894 mmol), ethanolamine (0.162 mL, 2.68 mmol), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (0.054 g, 0.093 mmol), and sodium carbonate (0.569 g, 5.37 mmol) were added to a nitrogen flushed flask. To the mixture was added toluene (20 mL) and nitrogen was bubbled through the reaction mixture for 2 minutes. To the reaction mixture was added Pd(OAc)2 (0.021 g, 0.093 mmol), then CO was bubbled through the reaction mixture for 1 minute and the reaction was placed under a CO balloon and stirred and heated at 85° C. for 18 hours. LCMS showed very little conversion from starting material to product. To the reaction mixture was added ethanolamine (0.162 mL, 2.68 mmol), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (0.054 g, 0.093 mmol), sodium carbonate (0.569 g, 5.37 mmol), and Pd(OAc)2 (0.021 g, 0.093 mmol), then CO was bubbled through the reaction mixture for 1 minute and the reaction was placed under a CO balloon and stirred and heated at 85° C. for 18 hours. The reaction mixture was cooled to room temperature, diluted with EtOAc, and filtered through a pad of celite. The filtrate was concentrated under reduced pressure and diluted with EtOAc. The solution was washed sequentially with water, and brine, before drying over MgSO4 and concentrating under reduced pressure. The crude material was dissolved in DMF and purified by reverse phase HPLC provide 111 (3 mg, 8%). 1H NMR (400 MHz, DMSO) δ 8.92 (d, J=2.1, 1H), 8.37 (t, J=5.5, 1H), 8.08 (d, J=21.9, 1H), 7.75 (dd, J=8.4, 2.1, 1H), 7.12 (d, J=8.4, 1H), 5.83 (dt, J=13.0, 6.6, 1H), 4.70 (t, J=5.4, 1H), 4.42 (t, J=4.8, 2H), 3.56-3.44 (m, 4H), 3.38 3.33 (m, 2H), 1.57 (d, J=6.6, 6H). MS (ESI(+)): m/z 400.1 (M+H)
