Acetic Acid → 1H-Pyrrole-2-carboxylic acid, 5-methyl-, ethyl ester

Participants

Reaction Conditions

Reaction Steps

To a 4-neck 22 L round bottom flask equipped with an overhead stirrer, liquid addition funnel, nitrogen inlet and an internal temperature probe was charged ethyl 3-oxobutanoate (1952 g, 15.0 mol) and glacial acetic acid (5 L). The resulting solution was cooled to 0° C. with an ice water bath and an aqueous solution of sodium nitrite (1242 g, 18.0 mol, 1.2 eq, in 1875 ml of water) was added slowly (4.5 h) not allowing the internal temperature above 10° C. The homogeneous red solution was allowed to warm to ambient and stirred for 48 h. The solution color changed from light red to yellow. Reaction vessel was then placed in a heating mantle, fitted with a reflux condenser and acetylacetaldehyde dimethyl acetal (1982 g, 15.0 mol, 1 eq) was added in one portion (the top of the reflux condenser was left open to air to allow for the rapid gas evolution during the addition of the zinc). Zinc (dust, 2156 g, 33 mol, 2.2 eq) was added in portions (at a rate such that gas evolution was controlled) over 4 h. The addition of zinc brought the reaction to reflux and after addition the dark red solution was heated at reflux for an additional 1.5 h. Contents of the reaction were poured hot into a 50 L container with 20 kg of ice and allowed to stir for 16 h. Resulting suspension was filtered, dried in convection oven and recrystallized with hot heptane yielding a light yellow solid (312 g, 13.6% yield).

Provenance & Evidence