Ammonium formate → Methyl 2-amino-2-(4-fluorophenyl)acetate

Participants

Reaction Conditions

Reaction Steps

4-Fluoro-α-[(phenylmethyl)amino]benzeneacetic acid methyl ester hydrochloride (12.2 kg, 39.4 moles) was added to a slurry of 10% palladium-on-carbon (1.2 kg) in isopropanol (50 L). Ammonium formate (5.0 kg, 79.4 moles) was added and the batch was heated to 50° C. Progress of the reaction was monitored by HPLC. The batch was filtered through Hyflo Supercel and the filter cake was washed with isopropanol (25 L). The filtrate was evaporated to low volume and flushed with isopropyl acetate (50 L). The residue was dissolved in isopropyl acetate (30 L) and washed with 5% aqueous potassium phosphate (40 L), followed by saturated aqueous sodium chloride (10 L). The solution was evaporated under vacuum to give 5.79 kg (87% yield) of racemic α-amino-4-fluorobenzeneacetic acid methyl ester. HPLC Conditions - Column: Zorbax Rx-C8, 25 cm×4.6 mm; Column temperature: 40° C.; Mobile phase: acetonitrile:0.1% aqueous phosphoric acid (70:30 v/v); Flow rate: 1 mL/min; Detection: UV at 220 nm; Approximate retention times: α-amino-4-fluorobenzeneacetic acid methyl ester: 2.2 minutes; 4-fluoro-α-[(phenylmethyl)amino]benzeneacetic acid methyl ester 2.6 minutes. If unreacted 4-fluoro-α-[(phenylmethyl)amino]-benzeneacetic acid methyl ester (>2%) remains after 1 hour, a second charge of 10% palladium-on-carbon (300 g) slurried in isopropanol (2.0 L) can be made, followed by ammonium formate (1.0 kg). Heating then continues until the reaction is complete.

Provenance & Evidence