Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 1983848Generated: November 2, 2026

Dimethylformamide → HCID 86614656, compound

https://huagongshe.com/reaction/1983848

Reaction equation

Participants

RoleNameHCIDCharge
ReactantDimethylformamideHCID 6228—
ReactantButyl AcrylateHCID 8846—
ReactantSodium AcetateHCID 517045—
ReactantHCID 54753138HCID 54753138—
CatalystTri-o-tolylphosphineHCID 80271—
Catalystpalladium(II) acetateHCID 167845—
SolventWaterHCID 962—
SolventEthyl AcetateHCID 8857—
ProductHCID 86614656HCID 8661465684.9%

Reaction Steps

A mixture of 2-[4-(3-bromophenyl)-7-chloro-6-methyl-2-oxo-2H-chromen-3-yl]-N-[4-fluoro-2-(trifluoromethyl)phenyl]acetamide (2.00 g), palladium acetate (0.0079 g) and tri-o-tolyl phosphine (0.0214 g) was placed in a reaction vessel, and nitrogen was passed through the reaction vessel for 10 minutes to replace the atmosphere of the reaction vessel with nitrogen. N,N-Dimethylformamide (10 ml), butyl acrylate (0.677 g) and sodium acetate (0.317 g) were added successively thereto, and the mixture was stirred at room temperature for about 20 minutes. Then, the mixture was stirred at 110° C. for 3 hours and cooled to room temperature. Ethyl acetate (20 ml) and water (20 ml) were poured to the reaction mixture and, after stirring, an organic layer was separated. The organic layer was washed successively with a mixture of 10% saline (18 ml) and conc. hydrochloric acid (2 ml), and 10% saline (20 ml). Activated charcoal (0.1 g) and tributyl phosphine (0.0712 g) were added to the organic layer, and the mixture was stirred at room temperature for 10 minutes. Then, the activated charcoal was removed by filtration and washed with ethyl acetate (4 ml). The combined filtrate and washings were concentrated to 6.0 g under reduced pressure, and n-heptane (12 ml) was added dropwise to the residue to precipitate crystals. After stirring at 5° C. for 1 hour, the crystals were collected by filtration and washed with cold ethyl acetate/n-heptane (1/3, 4 ml). A mixture of the resulting crystals (2.06 g) and acetone (10 ml) were heated to 50° C. to dissolve the mixture, activated charcoal (0.1 g) was added thereto, and the mixture was stirred for 10 minutes. The activated charcoal was removed by filtration, and washed with acetone (4 ml). Water (4.6 ml) was added dropwise to the combined filtrate and washings, and the mixture was stirred at 5° C. for 1 hour. Crystals were collected by filtration, and washed with cold acetone/water (2/1, 4 ml) to obtain the title compound (1.84 g, yield 84.9%).

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS07541478B2
Source datasetuspto-grants-2009_06
ORD IDord-9113f16d1a0442b68ed140c72bcd2d32
Source noteuspto-grants-2009_06