Hydrochloric Acid → (2S,3S)-1-dimethylamino-3-(3-methoxyphenyl)-2-methylpentan-3-ol hydrochloride

Participants

Reaction Conditions

Reaction Steps

A 100 l double wall jacketed reaction vessel with electric impeller stirrer, gas transfer line Pt100 temperature sensor and oil-based cooling and heating system was charged with 15 kg (59.7 mol) of a mixture of (2S,3S)-1-dimethylamino-3-(3-methoxyphenyl)-2-methylpentan-3-ol (98%) and (2R,3R)-1-dimethylamino-3-(3-methoxyphenyl)-2-methylpentan-3-ol (2%) in 70 l of acetone at 20° C. and a stirrer speed of 100 rpm. The solution was cooled to 5° C. Within 20 min, approx. 2.0 kg of gaseous hydrogen chloride were passed over the solution, the temperature in the vessel rising continuously to 28° C. despite cooling. The hydrogen chloride was taken from a hydrogen chloride cylinder which was connected to the gas transfer line of the vessel through a pressure reduction valve and hose and was placed on a balance for weight measurement. Further gaseous hydrogen chloride was then passed over until a 5 ml sample of the solution diluted with 10 ml of water had a pH value of 1-3. The suspension was stirred 5° C. for 2 h. The suspension was then centrifuged off in a centrifuge and washed once with 10 l of acetone. The product was dried in a drying cabinet at 40° C. for 24 h under reduced pressure to a final pressure of 20 mbar. 13.74 kg (80% of theoretical) of colourless (2S,3S)-1-dimethylamino-3-(3-methoxyphenyl)-2-methylpentan-3-ol hydrochloride with an enantiomeric purity of 100% were obtained.

Provenance & Evidence