Reaction Steps
A mixture of 3-iodo-1-(1-methyl-4-piperidyl)-1H-pyrazolo[3,4-d]pyrimidin-4-amine (0.2 g, 0.00056 mol), N-(5,7-dimethyl-1,3-benzoxazol-2-yl)-N-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]amine (0.2 g, 0.00056 mol), tetrakis(triphenylphosphine)-palladium (0.032 g, 0.000028 mol) and sodium carbonate (0.15 g, 0.0014 mol) in ethylene glycol dimethyl ether (20 mL) and water (5 mL) was heated at 80° C. for 3 hours under an atmosphere of nitrogen. Additional N-(5,7-dimethyl-1,3-benzoxazol-2-yl)-N-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]amine (0.2 g, 0.00056 mol) and tetrakis(triphenylphosphine)palladium (0.032 g, 0.000028 mol) were added, and the mixture was stirred at 80° C. for 16 hours. The mixture was allowed to cool to ambient temperature, and the solvent was removed under the reduced pressure. The residue was partitioned between water and dichloromethane. The aqueous layer was extracted with dichloromethane (2×50 mL). The combined organic extracts were washed with water, saturated aqueous sodium bicarbonate solution, and brine, and dried over magnesium sulfate. The solvents were evaporated under the reduced pressure to leave a brownish solid which was purified by flash column chromatography on silica using 5%-25% methanol/dichloromethane as a mobile phase to give N2-{4-[4-amino-1-(1-methyl-4-piperidyl)-1H-pyrazolo[3,4-d]pyrimidin-3-yl]phenyl}-5,7-dimethyl-1,3-benzoxazol-2-amine (0.16 g, 0.00034 mol). 1H NMR (TFA-d, 400 MHz) δ 8.50 (s, 1H), 7.85 (m, 2H), 7.80 (m, 2H), 7.10 (s, 2H), 5.45 (br, 1H), 3.95 (br, 2H), 3.75 (br, 1H), 3.45 (br, 1H), 3.10 (s, 3H), 2.85 (br, 1H), 2.65 (br, 1H), 2.49 (br, 2H), 2.40 (s, 3H), 2.42 (s, 3H). RP-HPLC (Delta Pak C18, 5 μm, 300A, 15 cm; 5%-85% acetonitrile—0.1M ammonium acetate over 20 min, 1 mL/min) Rt 10.7 min. MS: MH+ 469
