Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 2196624Generated: November 1, 2026

Sodium Bicarbonate → 2-(3-azidopropyl)-2,3-dihydro-1H-isoindole-1,3-dione

https://huagongshe.com/reaction/2196624

Reaction equation

Participants

RoleNameHCIDCharge
ReactantSodium BicarbonateHCID 516892—
ReactantSodium triacetoxyborohydrideHCID 5049666—
Reactant2-(3-(4-((methyl(5,6,7,8-tetrahydroquinolin-8-yl)amino)-methyl)-1H-1,2,3-triazol-1-yl)propyl)isoindoline-1,3-dioneHCID 44241987—
ReactantN-methyl-N-(prop-2-ynyl)-5,6,7,8-tetrahydroquinolin-8-amineHCID 59176406—
Reactant1-(3-(1,3-dioxoisoindolin-2-yl)propyl)-1H-1,2,3-triazole-4-carbaldehydeHCID 59176630—
CatalystAcetic AcidHCID 176—
Solvent1,2-DichloroethaneHCID 11—
Product2-(3-azidopropyl)-2,3-dihydro-1H-isoindole-1,3-dioneHCID 18645680%

Reaction Steps

A heavy-walled Pyrex tube was charged with a suspension of N-(3-bromopropyl)phthalimide (1.00 g, 3.72 mmol) and sodium azide (0.32 g, 4.84 mmol) in H2O (2 mL). The tube containing the resulting mixture was sealed with an aluminum crimp cap fitted with a silicon septum and then it was exposed to microwave irradiation for 30 min at a temperature of 120° C. After the irradiation, the reaction tube was cooled with high-pressure air until the temperature had fallen below 40° C. The product was extracted with ethyl acetate. The combined organic layers were dried with magnesium sulfate, filtered and concentrated in vacuo. The crude material (0.62 g, 72% yield) was used without further purification in the next step. 1H NMR (400 MHz, CDCl3) δ 7.86-7.83 (m, 2H), 7.73-7.70 (m, 2H), 3.77 (t, J=6.4 Hz, 2H), 3.36 (t, J=8.0 Hz, 2H), 1.94 (m, 2H). Step b: Preparation of 2-(3-(4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl)propyl)-isoindoline-1,3-dione (21). A solution of 2-(3-azidopropyl)isoindoline-1,3-dione, 20, (0.62 g, 2.69 mmol) in propargyl alcohol (4 mL) was warmed to 90° C. and stirred for 18 h. The reaction mixture was concentrated under reduced pressure. The crude product containing both regioisomers (˜1:1 ratio) was used in the next step without further purification. ESI+ MS: m/z (rel intensity) 301.1 (100, [M+H]+). Step c: Preparation of 1-(3-(1,3-dioxoisoindolin-2-yl)propyl)-1H-1,2,3-triazole-4-carbaldehyde (22). A solution of the regioisomers 21 (0.77 g, 2.69 mmol) in dichloromethane (10 mL) was treated with manganese dioxide (0.94 g, 10.77 mmol). The resulting mixture was stirred at room temperature for 2 h. The reaction mixture was filtered through Celite and concentrated. The crude product was purified by silica gel chromatography (0-5% methanol/CH2Cl2) to afford 0.24 g (31% yield) of 22 as a single regioisomer: 1H NMR (400 MHz, CDCl3) δ 10.08 (s, 1H), 8.34 (s, 1H), 7.85-7.65 (m, 4H), 4.45 (t, J=12.0 Hz, 2H), 3.77-3.71 (m, 2H), 2.42-2.34 (m, 2H); ESI+ MS: m/z (rel intensity) 285.0 (100, [M+H]+). Step d: Preparation of 2-(3-(4-((methyl(5,6,7,8-tetrahydroquinolin-8-yl)amino)-methyl)-1H-1,2,3-triazol-1-yl)propyl)isoindoline-1,3-dione (AH). A solution of 1-(3-(1,3-dioxoisoindolin-2-yl)propyl)-1H-1,2,3-triazole-4-carbaldehyde, 22, (0.24 g, 0.84 mmol), N-methyl-N-(prop-2-ynyl)-5,6,7,8-tetrahydroquinolin-8-amine, 5, (0.17 g, 1.01 mmol), sodium triacetoxyborohydride (0.27 g, 1.26 mmol) and a catalytic amount of acetic acid (2 drops) in 1,2-dichloroethane (10 mL) was warmed to 65° C. and stirred at this temperature for 24 h. The reaction mixture was cooled to room temperature. A saturated aqueous solution of sodium bicarbonate was added. The product was extracted with dichloromethane. The combined organic layers were dried over potassium carbonate, filtered and concentrated. The crude product was purified by silica gel chromatography (0-5% methanol/CH2Cl2) to afford 0.19 g (80% yield) of the desired product, AH: 1H NMR (400 MHz, CDCl3) δ 8.45 (d, J=4.4 Hz, 1H), 7.79-7.76 (m, 2H), 7.71 (s, 1H), 7.68-7.65 (m, 2H), 7.30 (d, J=7.6 Hz, 1H), 7.00 (dd, J=4.8, 8.0 Hz, 1H), 4.32 (dt, J=3.2, 7.2 Hz, 2H), 3.91 (dd, J=6.0, 9.2 Hz, 1H), 3.77-3.66 (m, 4H), 2.82-2.70 (m, 1H), 2.70-2.60 (m, 1H), 2.29 (s, 3H), 2.29-2.23 (m, 2H), 2.12-2.02 (m, 1H), 2.02-1.92 (m, 1H), 1.92-1.80 (m, 1H), 1.70-1.56 (m, 1H); ESI+ MS: m/z (rel intensity) 431.2 (100, [M+H]+). Step e: Preparation of N-((1-(3-aminopropyl)-1H-1,2,3-triazol-4-yl)methyl)-N-methyl-5,6,7,8-tetrahydroquinolin-8-amine tetrahydrochloride (W). A solution of 2-(3-(4-((methyl(5,6,7,8-tetrahydroquinolin-8-yl)amino)-methyl)-1H-1,2,3-triazol-1-yl)propyl)isoindoline-1,3-dione, AH, (0.16 g, 0.37 mmol) in ethanol (5 mL) was treated with hydrazine (23 μL, 0.74 mmol). The resulting mixture was warmed to 80° C. and stirred for 20 h. The reaction mixture was cooled to room temperature. The white precipitate that formed was filtered and the filtrate was concentrated in vacuo. Chloroform was added. More of the precipitate crashed out and was filtered off. The solution was concentrated and dried under reduced pressure to afford 0.08 g (72% yield) of product W: 1H NMR (400 MHz, CDCl3) δ 8.47 (d, J=3.6 Hz, 1H), 7.65 (s, 1H), 7.33 (d, J=7.6 Hz, 1H), 7.02 (d, J=4.8, 8.0 Hz, 1H), 4.39 (t, J=7.2 Hz, 1H), 3.95 (dd, J=5.6, 9.2 Hz, 1H), 3.75 (q, J=13.6 Hz, 2H), 2.85-2.60 (m, 2H), 2.68 (t, J=6.8 Hz, 2H), 2.31 (s, 3H), 2.25-2.05 (m, 2H), 2.05-1.95 (m, 2H), 1.95-1.80 (m, 1H), 1.75-1.58 (m, 1H); ESI+ MS: m/z (rel intensity) 301.2 (95, [M+H]+).

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS08338448B2
Source datasetuspto-grants-2012_12
ORD IDord-00587a3e0454479a9afe4c8425284ba4
Source noteuspto-grants-2012_12