Isopropyl Acetate → Dabco

Participants

Reaction Conditions

Reaction Steps

Ozone was delivered to an agitated solution of (3S,5R,6S)-3-allyl-5-(3-chlorophenyl)-6-(4-chlorophenyl)-1-((S)-1-(isopropylsulfonyl)-3-methylbutan-2-yl)-3-methylpiperidin-2-one (4.0 Kg, 7.27 mol) in a mixture of water (6 L) and acetonitrile (54 L) using a subsurface C22 Hastelloy sparger at 20° C. over the course of ten hours. An aqueous solution of sodium chlorite (80 wt %, 2.5 Kg, 29 mol) in water (14 L) was added over the course of 1 h, maintaining the temperature of the mixture below 40° C. The reaction mixture was agitated for 12 h and a solution of sodium bisulfite (3.0 Kg, 29 mol) in water (14 L) was added over the course of 2 h, maintaining the temperature of the reaction mixture below 40° C. The mixture was agitated for 1 h and the phases were separated. To the organic phases were added isopropyl acetate (IPAC) (20 L) and 1M aqueous sodium phosphate pH 6 (8 L). The mixture was agitated for 30 min and the phases were separated. The organic phase was washed with 1M aqueous sodium phosphate pH 6 (20 L) and with 1M aqueous sodium chloride (20 L). The mixture was distilled under reduced pressure to produce a distillate mass of 75 Kg while simultaneously adding isopropyl acetate (80 L). The water content of the solution by Karl Fisher was less than one percent. The organic phase was filtered. The solution was further distilled to a volume of approximately 16 L. The solution was heated to 55° C. and 1,4-diazabicyclo[2.2.2]octane (DABCO, 424 g, 3.65 mol) was added. (3S,5R,6S)-3-allyl-5-(3-chlorophenyl)-6-(4-chlorophenyl)-1-((S)-1-(isopropylsulfonyl)-3-methylbutan-2-yl)-3-methylpiperidin-2-one 1,4-diazabicyclo[2.2.2]octane (DABCO) salt seeds (136 g, 0.18 mol) were added as a slurry in isopropyl acetate and heptane (1/1, 800 mL). The mixture was agitated at 55° C. for 20 minutes and cooled to 20° C. over the course of 2 h. Heptane was added (16.8 L) over the course of 1 h and the mixture was agitated at 20° C. for 12 h. The product was filtered and the filter cake was washed once with a mixture of isopropyl acetate and heptane (2/3, 21 L) and once with a mixture of isopropyl acetate and heptane (1/4, 21 L). The product was dried under nitrogen to afford Compound A DABCO Salt (4.64 Kg) in 87% yield (100% liquid chromatography area percent (LCAP), 78.9 wt % Compound A). The compound A DABCO salt is a solvate of isopropyl acetate (IPAC) in accordance with Scheme 3. The Compound A DABCO Salt is the better performing purification control point to enhance the purity of the drug substance (Compound A). Typically, the purity of crude reaction mixtures of 97 to 99 liquid chromatography area percent purity can be improved to 100 liquid chromatography area percent purity (no impurity at greater level than 0.05 liquid chromatography area percent) using the crystallization of the DABCO salt. For comparison, enhancement of purity of the drug substance (Compound A) using Compound A Ethanolate as a control point allows for crude reaction mixtures of 97 to 99 liquid chromatography area percent purity to be improved to 99.5 to 99.6 liquid chromatography area percent purity (and multiple impurities are present in the filtered material at greater levels than 0.05 liquid chromatography area percent).

Provenance & Evidence