Chloroacetyl chloride → HCID 53416723, compound

Participants

Reaction Conditions

Reaction Steps

To a 5 L 4-necked round bottom flask was charged 1,2-difluorobenzene (130.0 g) and dry THF (1.3 L). This solution was cooled to <−60 while stirring under nitrogen. To this was added n-hexyllithium (455 mL of 2.5 M/hexane) dropwise such that T<−60 (˜15 minute addition). The solution quickly turned into a stirrable slurry, which was aged for 1 hour cold. To this was added zinc chloride (2.3 L of 0.5 M/THF) such that T<−60 and the slurry quickly became a homogeneous solution. This was warmed to 0° C. followed by the addition of copper(I) chloride (11.3 g) and chloroacetyl chloride (142 g) such that T<5° C. The reaction was assayed after 20 minutes and judged complete by HPLC. The reaction was quenched with 1N HCl (2 L) and then the two phase system was transferred to a seperatory funnel and diluted with IPAc (2 L). The aqueous was cut and the organic washed again with 1N HCl (2 L) followed by 1N NH4OH (2×2 L) and finally with water (2 L). The organic was concentrated to an oil. Assay yield=78%. The oil is then diluted with heptane (800 mL—does not all go into solution) and stirred while cooling to −30° C. During cooling the oil turns over to a crystalline solid. The slurry is aged 1 hour at −30° C., filtered and washed with cold heptane. Desired product isolated in 71% yield (154 g).

Provenance & Evidence