Carbon Dioxide → 2,2,3,3,4,4-Hexafluoro-4-(1,2,2,2-tetrafluoroethoxy)butanoic acid

Participants

Reaction Steps

A sample of diacid fluoride, FCOCF(CF3)—O—(CF2)3COF (503 g, 1.4 mol) prepared from the HFPO coupling of perfluorosuccinyl fluoride as described in US Pub. No. 2004/0116742 and was added over 2 hours to a stirred slurry of sodium carbonate (387 g, 3.7 mol) in 650 g of diglyme at 78° C. to make the disalt. The reaction liberated CO2 gas. Distilled water (35 g, 1.9 mol) was added at 85° C. The mixture was heated up to 165° C. with CO2 off-gassing and held for 30 minutes. Reaction was cooled down and sulphuric acid (250 g, 2.6 mol) in 1250 g of water was added to make the reaction mixture acidic. To the bottom phase was added 60 g NaOH in 60 g of water. Dried the salt in vacuum oven at 112° C./15 mm and recovered 450 g. To the salt was added 300 g of 50% sulphuric acid and the lower fluorochemical phase was washed once with 200 g of 50% sulphuric acid. Vacuum distillation gave CF3—CFH—O—(CF2)3COOH (400 g, 1.3 mol) for a 95% yield having a boiling point of 111° C./15 mm Hg. The acid was treated with caustic followed by sulphuric acid and vacuum distilled. This was repeated a second time to yield a colorless acid. The surfactant CF3—CFH—O—(CF2)3COONH4 having a melting point of 64-68° C. was made quantitatively from the reaction of 208 g of acid reacted with excess ammonium hydroxide and dried.

Provenance & Evidence