Isobutylene → Isobutylene

Participants

Reaction Conditions

Reaction Steps

Synthesis of the above recited ortho-tert-butyltoluenediamine (hereinafter 3tBTDA) was carried out in a 1 gallon stainless steel pressure vessel equipped with a mechanical stirrer. The vessel was charged with a 150 gram portion of a powdered commercially available silica-alumina catalyst containing 13% alumina and 1500 grams (12.24 moles of 2,6-toluenediamine. The autoclave was sealed and purged with nitrogen. A residual blanket of nitrogen was left in the autoclave, leaving the pressure at 16 psig. the contents of the reactor were heated to a temperature of 200° C. with constant agitation. Isobutylene was then introduced into the reactor and 870 grams or 15.5 moles were added over a 30 minute period resulting in an initial reaction of pressure of 970 psig. This provided a mole ratio of 1.26:1 isobutylene to toluenediamine. The reaction mixture was maintained at 200° C. for about 45 hours with constant agitation.

Provenance & Evidence