4-Aminophenol → Benzenamine, 4-[3-(trimethoxysilyl)propoxy]-

関与物質

反応条件

反応手順

A glass reactor was charged with 60 g (0.55 mole) p-aminophenol, 43.28 g of a 50% aqueous solution of sodium hydroxide (0.54 mole NaOH), 112 cc dimethylsulfoxide and 120 cc toluene. The resultant mixture was heated to the boiling point for six hours under a nitrogen atmosphere to remove all of the water present by azeotropic distillation. The reaction mixture was then allowed to cool to about 75° C., at which time 109 g (0.55 mole) of 3-chloropropyl trimethoxysilane was added dropwise while the reaction mixture was stirred. The temperature of the reaction mixture increased spontaneously to 85° C. during this addition. The temperature of the reaction mixture was maintained at from 75° to 85° C. by heating and control of the addition rate. Following completion of the addition, the reaction mixture was heated at 115° C. for 16 hours, following which the mixture was allowed to cool and was filtered to remove any solid material. The solvents were then removed under a pressure of about 15 mm of mercury at a temperature of about 60° C. The pressure was then reduced to from 3 to 4 mm of mercury and the material boiling from 170° to 180° C. was recovered. This fraction, which weighed 70 g, was distilled using a fractionating column and a 50 g portion boiling from 175° to 177° C. under a pressure of 3 mm of mercury, was collected. The colorless liquid was found to contain 10.19% silicon and 5.20% nitrogen. The calculated values for 3(p-aminophenoxy)propyl trimethoxy silane are 10.33% silicon and 5.17% nitrogen. The infrared and nuclear magnetic resonance spectra of the product were in agreement with the proposed structure.

情報源と証拠