反应详情

温度

115 °C

Using the general procedure described in Example 1 a reactor was charged with 73.7 g (0.55 mole) of o-allylphenol, 43.28 g of a 50% by weight aqueous solution of sodium hydroxide (0.54 mole NaOH), 112 cc dimethylsulfoxide and 120 cc toluene. The resultant mixture was heated to the boiling point for six hours under a nitrogen atmosphere to remove all of the water present by azeotropic distillation. The reaction mixture was then allowdd to cool to about 75° C., at which time 109 g (0.56 mole) of 3-chloropropyl trimethoxysilane was added dropwise while the reaction mixture was stirred. Following completion of the addition the reaction mixture was heated at 115° C. for about 16 hours, following which the mixture was allowed to cool and was filtered to remove any solid material. The solvents were then removed under a pressure of about 15 mm of mercury at a temperature of about 60° C. The pressure was then reduced to 2 mm of mercury and the material boiling at 146° C. was collected. The weight of this fraction was equivalent to a yield of 90% based on starting materials. Analysis by vapor phase chromatography indicated that the purity of the product was greater than 98%. The infrared and nuclear magnetic resonance spectra of the product were consistent with the proposed structure.

1. customto remove all of the water present
2. distillationby azeotropic distillation
3. additionwas added dropwise while the reaction mixture
4. additioncompletion of the addition the reaction mixture
5. temperatureto cool
6. filtrationwas filtered
7. customto remove any solid material
8. customThe solvents were then removed under a pressure of about 15 mm of mercury at a temperature of about 60° C
9. customthe material boiling at 146° C. was collected