Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 2392304Generated: November 1, 2026

Sodium Hydroxide → 5-(4-Bromophenyl)-5-methylimidazolidine-2,4-dione

https://huagongshe.com/reaction/2392304

Reaction equation

Participants

RoleNameHCIDCharge
ReactantSodium HydroxideHCID 14798—
Reactant2-[1-(4-Bromo-phenyl)-1-carbamoyl-ethylcarbamoyl]-pyrrolidine-1-carboxylic acid tert-butyl esterHCID 66620592—
SolventEthanolHCID 702—
Product5-(4-Bromophenyl)-5-methylimidazolidine-2,4-dioneHCID 233110123.9%

Reaction Steps

A mixture of 4-bromo acetophenone (8.0 g, 40.2 mmol), ammonium carbonate (40 g, 402 mmol) and potassium cyanide (3.4 g, 52.3 mmol) in a mixed solvent of ethanol (90 mL) and water (90 mL) was stirred at 55° C. for 5 hours, then 12 hours at ambient. The solution was adjusted to pH=6 with 6 NHCl carefully and subsequently stirred at room temerature for 2 hours. The precipitate was filtered off, washed with water. The collected white solid was dried under vacuum to give the product (9.2 g, 85%). m/z 267.1, 269.1 (M−H)−. 2-Amino-2-(4-bromo-phenyl)-propionic acid: A mixture of 5-(4-bromo-phenyl)-5-methyl-imidazolidine-2,4-dione (4.0 g, 14.9 mmol) and 3 N NaOH (50 mL) was heated in a sealed tube at 145° C. for two days, then diluted with water (100 mL). The solution was adjusted to pH=4 with 6 N HCl carefully and subsequently stirred at room temerature for 2 hours. The precipitate was filtered off, washed with water. The collected white solid was dried under vacuum to give the product (2.5 g, 65%). m/z 243.7, 245.7 (M+H)+. 2-Amino-2-(4-bromo-phenyl]propionic acid ethyl ester: To a solution of 2-amino-2-(4-bromo-phenyl)-propionic acid (1.0 g, 4.1 mmol) in ethanol (20 mL) was bubbled through HCl gas for five minutes. The mixture was stirred at ambient for 24 hours, then refluxed for 18 hours. The volatile component was removed in vacuo, and the residue was dissolved in ethyl acetate (150 mL), washed with NaHCO3 solution, water and brine, dried over MgSO4, filtered and concentrated in vacuo. The obtained residue was purified by flash chromatography to provide the desired product (800 mg, 72%). m/z 271.7, 273.7 (M+H)+. 2-[1-(4-Bromo-phenyl)-1-ethoxycarbonyl-ethylcarbamoyl]-pyrrolidine-1-carboxylic acid tert-butyl ester: N,N-diisopropylethylamine (4.1 mL, 23.6 mmol) was added dropwise to a mixture of pyrrolidine-1,3-dicarboxylic acid 1-tert-butyl ester (0.7 g, 3.2 mmol), HATU (1.2 g, 3.2 mmol) and 2-amino-2-(4-bromo-phenyl)-propionic acid ethyl ester (0.8 g, 2.9 mmol) in DMF (20 mL), and stirred at ambient condition for 3 hours. Most of the volatile componet was removed in vacuo, and the resulting residue was dissolved in ethyl acetate (150 mL), washed with water and brine, dried over Na2SO4, filtered and concentrated in vacuo. The obtained residue was purified by flash chromatography to provide the desired product as a colorless oil (0.8 g, 58%). m/z 490.9, 492.9 (M+Na)+. 2-[1-(4-Bromo-phenyl)-1-carbamoyl-ethylcarbamoyl]-pyrrolidine-1-carboxylic acid tert-butyl ester: To a stirred solution of 2-[1-(4-bromo-phenyl)-1-ethoxycarbonyl-ethylcarbamoyl]-pyrrolidine-1-carboxylic acid tert-butyl ester (280 mg, 0.6 mmol) in ethanol (8 mL) was bubbled through NH3 gas for 5 minutes at −78° C. The solution was stirred at ambient for 3 days in a sealed tube. Most of the volatile component was removed in vacuo, and the resulting residue was dissolved in ethyl acetate (150 mL), washed with water and brine, dried over Na2SO4, filtered and concentrated in vacuo. The obtained residue was purified by flash chromatography to provide the desired product as a colorless oil (169 mg, 64%). m/z 439.8, 441.8 (M+H)+. 2-[5-(4-Bromo-phenyl)-5-methyl-4-oxo-4,5-dihydro-4H-imidazol-2-yl]-pyrrolidine-1-carboxylic acid tert-butyl ester: To a stirred solution of 2-[1-(4-bromo-phenyl)-1-carbamoyl-ethylcarbamoyl]-pyrrolidine-1-carboxylic acid tert-butyl ester (160 mg, 0.36 mmol) in ethanol (10 mL) was added 1 N NaOH (5 mL), and stirred at ambient condition for 3 hours. Most of the volatile componet was removed in vacuo, and the resulting residue was dissolved in ethyl acetate (100 mL), washed with water and brine, dried over Na2SO4, filtered and concentrated in vacuo. The obtained residue was purified by flash chromatography to provide the desired product as a white solid (120 mg, 79%). m/z 421.8, 423.8 (M+H)+. 2-{5-Methyl-4-oxo-5-[4-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-phenyl]-4,5-dihydro-1H-imidazol-2-yl}-pyrrolidine-4-carboxylic acid tert-butyl ester: Pd(PPh3)4 (31 mg, 0.03 mmol) was added to a sealed tube containing a mixture of 245-(4-bromo-phenyl)-5-methyl-4-oxo-4,5-dihydro-1H-imidazol-2-yl]-pyrrolidine-1-carboxylic acid tert-butyl ester (113 mg, 0.27 mmol), bis(pinacolato)diboron (144 mg, 0.57 mmol), potassium acetate (66 mg, 0.68 mmol) and 1,4-dioxane (3 mL). The reaction mixture was flushed with nitrogen, heated at 80° C. for 16 hours, and then the volatile component was removed in vacuo. The residue was dissolved in ethyl acetate (100 mL), washed with NaHCO3 solution, water and brine, dried over Na2SO4, filtered and concentrated in vacuo. The obtained residue was purified by flash chromatography to provide the desired product as a colorless oil (100 mg, 79%). m/z 470.0 (M+H)+. 2-(5-{4′-[4-Boc-2-(1-methyl-pyrrolidin-2-yl)-5-oxo-4,5-dihydro-3H-imidazol-4-yl]-biphenyl-4-yl}-1H-imidazol-2-yl)-pyrrolidine-1-carboxylic acid tert-butyl ester: Following the procedure used to prepare compound 2-(5-{4′-[2-(1-Boc-pyrrolidin-3-yl)-3H-imidazol-4-yl]-biphenyl-4-yl}-1H-imidazol-2-yl)-pyrrolidine-1-carboxylic acid tert-butyl ester, except that 2-{5-methyl-4-oxo-5-[4-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-phenyl]-4,5-dihydro-1H-imidazol-2-yl}-pyrrolidine-1-carboxylic acid tert-butyl ester was used instead of 2-{5-[4-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-phenyl]-1H-imidazol-2-yl}-pyrrolidine-1-carboxylic acid tert-butyl ester. m/z 655.1 (M+H)+. (1-{2-[5-(4′-{2-[1-(2-Methoxycarbonylamino-3-methyl-butyryl)-pyrrolidin-2-yl]-4-methyl-5-oxo-4,5-dihydro-3H-imidazol-4-yl}-biphenyl-4-yl)-1H-imidazol-2-yl]-pyrrolidine-1-carbonyl}-2-methyl-propyl)-carbamic acid methyl ester. Following the procedure used to prepare compound (1-{3-[5-(4′-{2-[1-(2-methoxycarbonylamino-3-methyl-butyryl)-pyrrolidin-2-yl]-3H-imidazol-4-yl}-biphenyl-4-yl)-1H-imidazol-2-yl]-pyrrolidine-1-carbonyl}-2-methyl-propyl)-carbamic acid methyl ester, except that 2-(5-{4′-[4-Boc-2-(1-methyl-pyrrolidin-2-yl)-5-oxo-4,5-dihydro-3H-imidazol-4-yl]-biphenyl-4-yl}-1H-imidazol-2-yl)-pyrrolidine-1-carboxylic acid tert-butyl ester was used instead of 2-(5-{4′42-(1-Boc-pyrrolidin-3-yl)-3H-imidazol-4-yl]-biphenyl-4-yl}-1H-imidazol-2-yl)-pyrrolidine-1-carboxylic acid tert-butyl ester. 1H-NMR (300 MHz, CD3OD) δ 7.90-7.50 (m, 9H), 5.25 (t, 1H), 4.23 (d, 2H), 4.18-3.75 (m, 4H), 3.75-3.30 (m, 6H), 2.65-2.40 (m, 2H), 2.40-1.70 (m, 12H), 1.10-0.80 (m, 12H); m/z 769.2 (M+H)+.

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS08273341B2
Source datasetuspto-grants-2012_09
ORD IDord-dd30e1fd144a44679441dbecf8768314
Source noteuspto-grants-2012_09