HRID241302

反应详情

EQUATION

反应方程式

HRID 241302 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

4

CONDITIONS

反应条件

温度
20 °C

PROCEDURE

实验过程

To a mixture of N-benzylethanolamine (81.7 g, 0.540 mol), 2-propanol (50 ml) and water (50 ml) was added dropwise at 15 to 25° C. (S)-epichlorohydrin (50.0 g, 0.540 mol, 99% ee). After reaction at 10 to 25° C. for 7 hr, aqueous 24% NaOH solution (NET 28.1 g, 0.703 mol) was added at 5 to 10° C. After reaction at 25° C. for 20 hr, the reaction mixture was concentrated under reduced pressure to evaporate 2-propanol. To the residue was added toluene (150 ml) and, after partitioning, the organic layer was concentrated under reduced pressure to give a mixture of N-benzyl-2-hydroxymethylmorpholine and N-benzyl-1,4-oxazepane (125.3 g, N-benzyl-2-hydroxymethylmorpholine:N-benzyl-1,4-oxazepane compound=74.4:25.6). To this mixture were added methanol (200 ml) and palladium carbon (11.0 g when dry), and the mixture was reacted under a hydrogen stream at 25° C. for 15 hr. Palladium carbon was filtered off, trifluoroacetic acid (61.8 g, 0.540 mol) was added to the filtrate at 5 to 10° C., and methanol was evaporated under reduced pressure. The residue was subjected twice to azeotropic distillation with dehydrating with 2-propanol (100 ml). To the residue after azeotropic distillation with dehydrating was added ethyl acetate (450 ml) at 40° C., and the mixture was cooled to 20° C. Seed crystal was added and, after crystallization, the mixture was cooled to 0° C. and stirred for 1 hr. The crystals were collected by filtration, washed withed twice with ethyl acetate (100 ml) and dried (1 mmHg, 40° C.) to give (R)-2-hydroxymethylmorpholine trifluoroacetate (51.3 g) (yield from (S)-epichlorohydrin 41.1%). The obtained (R)-2-hydroxymethylmorpholine trifluoroacetate was analyzed by HPLC to find an optical purity of 99% ee.

WORKUP

后处理

  1. customAfter reaction at 10 to 25° C. for 7 hr
  2. customAfter reaction at 25° C. for 20 hr
  3. concentrationthe reaction mixture was concentrated under reduced pressure
  4. customto evaporate 2-propanol
  5. additionTo the residue was added toluene (150 ml)
  6. customafter partitioning
  7. concentrationthe organic layer was concentrated under reduced pressure
  8. customto give
  9. customthe mixture was reacted under a hydrogen stream at 25° C. for 15 hr
  10. filtrationPalladium carbon was filtered off
  11. custommethanol was evaporated under reduced pressure
  12. distillationThe residue was subjected twice to azeotropic distillation
  13. distillationTo the residue after azeotropic distillation with dehydrating
  14. additionwas added ethyl acetate (450 ml) at 40° C.
  15. additionSeed crystal was added
  16. customafter crystallization
  17. temperaturethe mixture was cooled to 0° C.
  18. filtrationThe crystals were collected by filtration
  19. washwashed
  20. customdried (1 mmHg, 40° C.)