反应详情

温度

125 °C

Into a three-neck 750 ml flask equipped with a mechanical agitator, thermometer and condenser were charged 250 g of 99.7% pure granular pentachlorobenzene and 440 g of 92% sulfuric acid which was heated to 104°-108° C. by means of an electric heating mantle. The flask was then charged with 100 g of 99% pure concentrated nitric acid. This concentrated nitric acid was gradually added over a period of 0.83 hours while the reaction mixture was stirred and the temperature of the mixture maintained at 104°-108° C. Following this addition, the reaction mixture was heated to 125° C. for one hour followed by further heating at 135° C. The reaction mixture was heated again to raise the reaction temperature to above 145° C. and to form a liquid melt of pentachloronitrobenzene. The reaction mixture was maintained at this temperature for about 30 minutes. Next, the reaction mixture was cooled to 30°-70° C. by switching off the heating mantle and blowing cool air on the flask for about 30 minutes. The reaction mixture was then filtered by suction. The pentachloronitrobenzene product in the filter cake was washed twice with about 500 ml of distilled water each time. After drying at room temperature for 24 hours, the product was analyzed by Vapor Phase Chromatography (VPC). In this specific example, the product was of exceptional quality with an assay of 99.74% pentachloronitrobenzene, less than 0.01% pentachlorobenzene and 0.26% hexachlorobenzene.

1. customInto a three-neck 750 ml flask equipped with a mechanical agitator
2. temperaturewas heated to 104°-108° C. by means of an electric heating mantle
3. temperaturethe temperature of the mixture maintained at 104°-108° C
4. additionthis addition
5. temperatureby further heating at 135° C
6. temperatureThe reaction mixture was heated again
7. temperatureto raise the reaction temperature to above 145° C.