反应详情

温度

60 °C

Into a reactor there are introduced 765 parts of bis (β-cyanoethyl) sulfide, followed by 14.35 parts of cuprous bromide. On heating to 60° C. with continuous stirring, a brownish-yellow solution of the copper complex is obtained. 95.8 parts of 3-acetamido-4-(2'bromo-4',6'-dinitrophenylazo)-N,N-diethylaniline are added, and the temperature is raised to 115° C. Raising the temperature to 115° C. causes the compound to completely dissolve. At ths temperature, a solution of 10.8 parts of sodium cyanide in 40 parts of water is introduced into the reactor during a period of 20 minutes, allowing the steam to escape. Stirring is continued for a further 20 to 30 minutes while verifying by thin layer chromatography that the starting organic bromo-derivative is absent. The reaction mass is cooled to 30°-35° C., which causes crystallization of the dyestuff. The resultant product is filtered off, washed with water to displace the solvent contained in the paste, and dried. 80.2 parts of 3 -acetamido-4-(2'cyano-4',6'-dinitro-phenylazo)-N,N-diethylaniline are obtained. The titre (purity) of this product is 98.5% and it contains a copper concentration of less than 3000 parts per million. The wash water is introduced into a decanter, and the organic solvent part is withdrawn and reunited with the fraction of solvent obtained during filtration. There are thus recovered 720 parts of bis(β-cyanoethyl) sulfide which contain 4.35 parts of the cyanoazo dyestuff (giving an overall balance of the reaction of 98%) and 5.75 parts of copper (which corresponds to a recovery of 91% of the initial copper complex.

1. customa brownish-yellow solution of the copper complex is obtained
2. temperaturethe temperature is raised to 115° C
3. temperatureRaising the temperature to 115° C.
4. dissolutionto completely dissolve
5. temperatureThe reaction mass is cooled to 30°-35° C.
6. customcrystallization of the dyestuff
7. filtrationThe resultant product is filtered off
8. washwashed with water
9. customdried