反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
PROCEDURE
实验过程
Into a 25 ml. flask, equipped with magnetic stirrer, heating mantle, condensor, calcium sulfate drying tube, constant temperature controller and thermometer, was charged 0.98 g. of cyclohexanone (0.01 M), 11.1 g. of heptanonitrile (0.10 M) and 0.66 g. of 85% potassium hydroxide flakes. The mixture was heated cooled, 30 ml. of hexane was added, and the mixture washed six times with 30 ml. portions of water and once with saturated brine. The washes were each in succession, cross-extracted with two 15 ml. portions of hexane. The combined organic and hexane phases were dried over anhydrous sodium sulfate and solvent evaporated on a rotary evaporator at ~30 mm. Hg to give 6.7 g. of oil. Gas chromatographic analysis (6' × 1/4" column, 20% Carbowax 20 m. on Chromasorb W, programmed 135° C. to 220° C. at 4°/minute, He flow ~60 ml./minute) showed product nitrile peaks at 17.8 minutes (10.3%) and 20.1 minutes (4.1%) with heptanonitrile at 4.3 minutes (85.5%). The product peaks which eluted together at 17.6 minutes on a 20% SE30 column (6' × 1/4") under the same operating parameters were trapped out for odor evaluation. An IR spectrum on the trapping of combined isomers showed a nitrile band at 4.5 microns and an olefin band at 6.27 microns. The product was described by perfumers as having an interesting, fruity, floral, salicylate quality.
WORKUP
后处理
- customflask, equipped with magnetic stirrer
- additionwas charged 0.98 g
- temperatureThe mixture was heated
- temperaturecooled
- washthe mixture washed six times with 30 ml
- extractioncross-extracted with two 15 ml
- dry with materialThe combined organic and hexane phases were dried over anhydrous sodium sulfate and solvent
- customevaporated on a rotary evaporator at ~30 mm. Hg
- customto give 6.7 g
- customprogrammed 135° C. to 220° C. at 4°/minute, He
- customat 17.8 minutes
- custom(10.3%) and 20.1 minutes (4.1%)
- customat 4.3 minutes
- washThe product peaks which eluted together at 17.6 minutes on a 20% SE30 column (6' × 1/4") under the same operating parameters