Participants
| Role | Name | HCID | Charge |
|---|
| Reactant | Isopropanol | HCID 3776 | — |
| Reactant | 4,4,4-Trifluoro-3-[4-(7-[2-(trimethylsilyl)ethoxy]methyl-7H-pyrrolo[2,3-d]pyrimidin-4-yl)-1H-pyrazol-1-yl]butanenitrile | HCID 57477649 | — |
| Product | HCID 68475632 | HCID 68475632 | 94% |
Reaction Steps
A slurry of 1.5 Kg of 20-micron Chiralcel® OD chiral stationary phase (CSP) made by Daicel in 3.0 L of isopropanol (IPA) was packed into a PROCHROM Dynamic Axial Compression Column LC110-1 (11 cm ID×25 cm L; Column Void Vol.: approximate 1.5 L) under 150 bar of packing pressure. The packed column was then installed on a Novasep Hipersep HPLC unit. The column and HPLC system were flushed with methanol (17 L) and the mobile phase made by a mixture of isopropanol and hexane (2:8 by volume, 17 L). The feed solution was then prepared by dissolving 4,4,4-trifluoro-3-(4-(7-((2-(trimethylsilyl)ethoxy)methyl)-7H-pyrrolo[2,3-d]pyrimidin-4-yl)-1H-pyrazol-1-yl)butanenitrile (33, racemic SEM-protected compound, 3100 g, 7.1 mol) in the mobile phase to a concentration of 120 g/L. The feed solution (120 mL per injection) was then sequentially injected into the preparative HPLC chiral column for separation. The chiral column was eluted with the mobile phase at a flow rate of 570 mL/min at room temperature. The column elution was monitored by UV at wavelength 330 nm. Under these conditions, a baseline separation of the two enantiomers was achieved. The cycle time for each injection was 11 minutes and a total of 210 injections were performed for this separation process. Fractions for Peak 1 (the undesired (S)-enantiomer, (S)-34) and Peak 2 (the desired (R)-enantiomer, (R)-34) were collected separately from each injection, and fractions collected for each peak were continuously concentrated at 40° C. under reduced pressure (40-120 bar). The residue from each evaporator was further dried under high vacuum to constant weight to afford (3R)-3-cyclopropyl-3-(4-(7-((2-(trimethylsilyl)ethoxy)methyl)-7H-pyrrolo[2,3-d]pyrimidin-4-yl)-1H-pyrazol-1-yl)propanenitrile ((R)-34, 1457 g, 1550 g theoretical, 94%) from Peak 2 as a light yellow oil which solidified upon standing at room temperature in vacuo and (3S)-cyclopropyl-3-(4-(7-((2-(trimethylsilyl)ethoxy)methyl)-7H-pyrrolo[2,3-d]pyrimidin-4-yl)-1H-pyrazol-1-yl)propanenitrile ((S)-34, 1488 g, 1550 g theoretical, 96%) from Peak 1 as an yellow oil which solidified upon standing at room temperature in vacuo.
Provenance & Evidence
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| Patent number | US08883806B2 |
|---|
| Source dataset | uspto-grants-2014_11 |
|---|
| ORD ID | ord-870db68fff7a4c9897c225e39b9187d4 |
|---|
| Source note | uspto-grants-2014_11 |
|---|