Hydrogen Peroxide → Potassium;prop-2-enamide;prop-2-enoate

関与物質

反応条件

反応手順

In a polymerization vessel, 0.9 g methylene bisacrylamide and 192 g acrylamide were dissolved in 500 g water first and mixed with 84 g acrylic acid. Then, the monomer solution was neutralized with 102 g potassium hydroxide solution (45%), cooled to 10° C. and blown out with nitrogen. After addition of the catalyst solutions (1.6 g sodium peroxidisulfate, 0.2 g hydrogen peroxide (35%) and 0.01 g ascorbic acid) and 10 g 2,2'-azobis(2-methyl-propionamidine)dihydrochloride used as blowing agent, the polymerization was initiated. Thorough mixing of the catalyst solutions with the monomer solution is a precondition for a homogeneous polymerization in the whole polymer block. The maximum temperature of 100° C. (in a well-insulated polymerization vessel) was reached within 10 minutes. After completed polymerization, the polymer gel was crumbled, dried at 120° C. and ground to the desired size fraction. A cross-linked potassium acrylate/acrylamide copolymer was obtained which had a porous structure resulting from the entrapped nitrogen bubbles.

情報源と証拠