HRID357508

反应详情

EQUATION

反应方程式

HRID 357508 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

3

CONDITIONS

反应条件

温度
85 °C

PROCEDURE

实验过程

A 3-liter 3-necked round bottom flask is equipped with a heating mantle monitored by a J-KEM thermocouple and an overhead stirrer; under nitrogen, the flask is charged with 3-(but-2-enyloxymethyl)-4-iodo-2-methoxy-pyridine (30.0 g, 93.9 mmol), prepared as in example 2, and 939 mL (0.1M) of N,N-dimethylformamide, followed by successive addition of anhydrous potassium carbonate (26.0 g, 188 mmol), palladium acetate (422 mg, 1.88 mmol) and tetra-n-butylammonium chloride (13.1 g, 47.0 mmol). The light brown mixture is brought to 90° C. and stirred for 30 min. The now dark brown mixture is allowed to cool to 85° C. and stirring is continued for 20 h when TLC (10% EtOAc/hexane) indicates complete reaction. After being cooled to ambient temperature, the mixture is filtered through Celite 545® (80 g), washed with MTBE (0.5 L) and the filtrate is poured into 800 mL of ice water and extracted with MTBE (3×600 mL). The combined extracts are successively washed with water (700 mL) and brine (700 mL), dried over anhydrous Na2SO4 (150 g). Evaporation in vacuo yields crude 4-ethyl-8-methoxy-1H-pyrano[3,4-c]pyridine 1H NMR (400 MHz) indicates an endo/exo ratio of 8:1. Vacuum distillation at about 112°-120° C. yields 4-ethyl-8-methoxy-1H-pyrano[3,4-c]pyridine as an 11:1 endo/exo mixture. 1H-NMR (400 MHz, CDCl3) δ8.04 (d, J=5.4 Hz, 1H), 6.65 (d, J=5.4 Hz, 1H), 6.54 (s, 1H), 5.04 (s, 2H), 3.94 (s, 3H), 2.32 (m, 2H), 0.97 (t, J=7.2 Hz, 3H), HRMS (EI+): calc for C11H13 NO2 : 191.0946, Found: 191.0952. IR 3450, 2962, 1731, 1602, 1581, 1454, 1390, 1362, 1313, 1267 cm-1

WORKUP

后处理

  1. customA 3-liter 3-necked round bottom flask is equipped with a heating mantle
  2. customis brought to 90° C.
  3. stirringstirring
  4. waitis continued for 20 h
  5. customreaction
  6. temperatureAfter being cooled to ambient temperature
  7. filtrationthe mixture is filtered through Celite 545® (80 g)
  8. washwashed with MTBE (0.5 L)
  9. additionthe filtrate is poured into 800 mL of ice water
  10. extractionextracted with MTBE (3×600 mL)
  11. washThe combined extracts are successively washed with water (700 mL) and brine (700 mL)
  12. dry with materialdried over anhydrous Na2SO4 (150 g)
  13. customEvaporation in vacuo
  14. customyields crude 4-ethyl-8-methoxy-1H-pyrano[3,4-c]pyridine 1H NMR (400 MHz)
  15. distillationVacuum distillation at about 112°-120° C.