HRID364524

反应详情

EQUATION

反应方程式

HRID 364524 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

3

PROCEDURE

实验过程

Vilsmeier reagent prepared from dimethylformamide (0.22 g.) and phosphorus oxychloride (0.46 g.) was suspended in dry ethyl acetate (20 ml.). 2-(2-Formamido-4-thiazolyl)-2-methoxyiminoacetic acid (anti isomer, 0.62 g.) was added to the suspension under ice-cooling with stirring, and the mixture was stirred at the same temperature for 30 minutes to prepare the activated acid solution. The solution was added all at once to a solution of p-nitrobenzyl 7-amino-3-chloro-3-cephem-4-carboxylate (1 g.) and trimethylsilylacetamide (2.58 g.) in ethyl acetate (20 ml.) at -20° C. with stirring, and the mixed solution was stirred at -10° to -20° C. for 1.5 hours. To the resultant solution was added water (20 ml), and the solution was stirred at -20° C. After separating the ethyl acetate layer, the aqueous layer was extracted with ethyl acetate (20 ml.). The ethyl acetate layer and the extract were combined together, washed with 10% hydrochloric acid (20 ml.) twice, water (20 ml.) once, a 5% aqueous solution of sodium bicarbonate (20 ml.) three times, and an aqueous solution of sodium chloride (20 ml.) once in turn, dried, and then concentrated under reduced pressure. The residue was washed with diethyl ether (50 ml.) to give p-nitrobenzyl 7-{2-(2-formamido-4-thiazolyl)-2-methoxyiminoacetamido}-3-chloro-3-cephem-4-carboxylate (anti isomer, 1.27 g.), m.p. 135° to 145° C. (dec.).

WORKUP

后处理

  1. temperaturecooling
  2. stirringthe mixture was stirred at the same temperature for 30 minutes
  3. customto prepare the activated acid solution
  4. stirringwith stirring
  5. stirringthe mixed solution was stirred at -10° to -20° C. for 1.5 hours
  6. stirringthe solution was stirred at -20° C
  7. customAfter separating the ethyl acetate layer
  8. extractionthe aqueous layer was extracted with ethyl acetate (20 ml.)
  9. washwashed with 10% hydrochloric acid (20 ml.) twice
  10. dry with materialwater (20 ml.) once, a 5% aqueous solution of sodium bicarbonate (20 ml.) three times, and an aqueous solution of sodium chloride (20 ml.) once in turn, dried
  11. concentrationconcentrated under reduced pressure
  12. washThe residue was washed with diethyl ether (50 ml.)