Back
HuagongsheHuagongshe Chemistry Print Report · For research reference only
HRID 394719Generated: October 29, 2026

Hydrochloric Acid → HCID 69681484, compound

https://huagongshe.com/reaction/394719

Reaction equation

Participants

RoleNameHCIDCharge
ReactantHydrochloric AcidHCID 313—
ReactantAllyl bromideHCID 7841—
ReactantAmmonium ChlorideHCID 25517—
Reactant1-tert-Butyl 3-methyl 4-oxopiperidine-1,3-dicarboxylateHCID 11276893—
CatalystZincHCID 23994—
SolventDiethyl EtherHCID 3283—
SolventTetrahydrofuranHCID 8028—
ProductHCID 69681484HCID 69681484—

Reaction Steps

101.66 g of methyl 1-(tert-butyloxycarbonyl)-4-oxopiperidine-3-carboxylate were added, under an inert atmosphere and at a temperature close to 20° C., to 2.156 liters of a saturated aqueous solution of ammonium chloride and of THF (10/1 by volume) of THF. 34.73-cm3 of allyl bromide were then added, followed by 77.51 g of zinc while maintaining the temperature below 30° C. A solution of 69.47-cm3 of allyl bromide in 50-cm3 of THF was then poured in dropwise. After stirring for 3 hours at a temperature close to 20° C., the reaction was incomplete. 77.51 g of zinc were again added and then 104-cm3of allyl bromide were poured in dropwise while the temperature was maintained below 30° C. The stirring was maintained at a temperature close to 20° C. for 15 hours, after which the reaction was still incomplete. 35 g of zinc were again added and then 55-cm3 of allyl bromide were poured in dropwise while the temperature was maintained below 30° C. The stirring was maintained at a temperature close to 20° C. for 4 hours, after whichthe reaction was still incomplete. 10 g of zinc were again added and then 25-cm3 of allyl bromide were poured in dropwise while the temperature was maintained below 30° C. The stirring was maintained at a temperature close to 20° C. for 2 hours. The reaction mixture was taken up in 900-cm3 of a 1 N HCl solution and 2 liters of ethyl ether and filtered on sintered glass. The filtrate was washed with 3 times 500-cm3 of etyl ether. The organic phase was washed with a saturated aqueous sodium chloride solution, dried over magnesium sulfate and concentrated to dryness under reduced pressure (5 kPa). A yellow oil was obtained, which was purified by chromatography, under a nitrogen pressure of 50 kPa, on a column of silica gel (particle size 20-45 μ; diameter 12 cm; height 60 cm), eluting with a mixture of cyclohexane-ethyl acetate (80/20 by volume) and collecting 200-cm3 fractions. Fractions 51 to 75 were combined and then concentrated. 63.5 g of methyl 1-(tert-butyloxycarbonyl)-4-allyl-4-hydroxypiperidine-3-carboxylate were obtained in the form of a light yellow oil.

Provenance & Evidence

DOI10.6084/m9.figshare.5104873.v1
Patent numberUS06602884B2
Source datasetuspto-grants-2003_08
ORD IDord-eca08d5c5462426da6b0c792e51c0359
Source noteuspto-grants-2003_08