反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
CONDITIONS
反应条件
- 温度
- 5 °C
PROCEDURE
实验过程
Ethyl trans-4-allyl-2,5-dimethyl-1-piperazinecarboxylate (630 g, 2.78 mol) was added to a solution of 87% potassium hydroxide pellets (2970 g, 46 mol) in 4300 mL of 95% ethanol and heated at reflux for 1.5 hours. Carbon dioxide evolution was observed for the first 0.5-1 hour of heating. The reaction was cooled below reflux temperature and 2000 mL of toluene was carefully added. Ethanol was removed by azeotropic distillation at 105 C, while adding an additional 4000 mL of toluene to the reaction flask during the course of the distillation. After collection of 9000 mL of distillate, the reaction was cooled to 100 C and 1000 mL of toluene was carefully added. The solution was slowly cooled to 5 C and maintained at 5° C. for 30 minutes. The solution was filtered, and the filter cake was washed with an additional 1500 mL of toluene. The filtrate was washed with 1000 mL of water, dried over magnesium sulfate, and the solvent was removed to give 296 g (69%) of trans-1-allyl-2,5-dimethylpiperazine as a dark liquid. NMR (300 MHz, DMSO-d6): δ 0.87 (d, J=6.3 Hz, 3H); 0.92 (d, J=6.3 Hz, 3H); 1.63 (t, J=11 Hz, 1H); 2.05 (m, 1H); 2.30 (t, J=11 Hz, 1H); 2.6-2.8 (m, 4H); 3.33 (dd, J1=5 Hz, J2=14 Hz, 1H); 5.09 (d, J=8.7 Hz, 1H); 5.13 (d, J=14 Hz, 1H) 5.8 (m, 1H).
WORKUP
后处理
- temperatureheated
- temperatureat reflux for 1.5 hours
- customwas observed for the first 0.5-1 hour
- temperatureof heating
- temperatureThe reaction was cooled
- additionwas carefully added
- customEthanol was removed by azeotropic distillation at 105 C
- additionwhile adding an additional 4000 mL of toluene to the reaction flask
- distillationduring the course of the distillation
- distillationAfter collection of 9000 mL of distillate
- temperaturethe reaction was cooled to 100 C and 1000 mL of toluene
- additionwas carefully added
- temperatureThe solution was slowly cooled to 5 C
- filtrationThe solution was filtered
- washthe filter cake was washed with an additional 1500 mL of toluene
- washThe filtrate was washed with 1000 mL of water
- dry with materialdried over magnesium sulfate
- customthe solvent was removed