反应详情

An aqueous slurry of zinc oxide was prepared by charging a 300 mL reaction flask equipped with a stirrer with 10.0 g (123 mmol) of zinc oxide (JIS grade 2, available from HakusuiTech Ltd.) and 90.0 g of water. An aqueous solution of 19.4 g (123 mmol) of phenylphosphonic acid (Nissan Chemical Industries, Ltd.) dissolved in 110.0 g of water was gradually added dropwise at room temperature (about 25° C.) to this slurry with stirring, thereby effecting a reaction for five hours. The slurry was then filtered and the wet cake was thoroughly rinsed with water. The wet cake was subsequently dried at 120° C. for at least 12 hours, yielding a white powder of zinc phenylphosphonate. FIG. 2 shows a micrograph taken with a field-emission scanning electron microscope (SEM: JSM-7400F, manufactured by JEOL Ltd.) of the white powder of zinc phenylphosphonate thus obtained.

1. customa 300 mL reaction flask
2. additionwas gradually added dropwise at room temperature (about 25° C.) to this slurry
3. customa reaction for five hours
4. filtrationThe slurry was then filtered
5. washthe wet cake was thoroughly rinsed with water
6. customThe wet cake was subsequently dried at 120° C. for at least 12 hours