反应详情

温度

100 °C

A 2 liter Parr autoclave was charged with 100 grams of 2,2,4,4-tetramethylcyclobutane-1,3-dione, 600 grams of dionized water, and 50 grams of 2% ruthenium on alumina (surface area=10 m2/g, purchased from BASF Catalysts). The autoclave was pressure purged three times with nitrogen and three times with hydrogen, and the pressure was increased to 3.5 MPa (500 psig) with hydrogen. The autoclave was heated to 100° C. with stirring at approximately 1000 rpm and held for 6 hours at 3.5 MPa (500 psig). Analysis of the product by gas chromatography indicated that 98.5% conversion of the 2,2,4,4-tetramethylcyclobutane-1,3-dione was obtained with 100% selectivity to 2,2,4,4-tetramethycyclobutane-1,3-diol with a cis:trans ratio of 2.15:1.

1. custompurged three times with nitrogen and three times with hydrogen
2. temperaturethe pressure was increased to 3.5 MPa (500 psig) with hydrogen