HRID596822

反应详情

EQUATION

反应方程式

HRID 596822 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

PROCEDURE

实验过程

A solution containing 0.75 parts of 2-methylcyclopentane-1,3-dione in 19 parts of dimethylformamide is treated sequentially with 1.0 part by volume of triethylamine and 1.9 parts of N,N,N-trimethyl-N-(2-[5,6-dihydro-3-methoxyisoquinol-8-yl]prop-2-en-1-yl)ammonium iodide. The resulting homogeneous solution is heated at about 135° for 4 3/4 hours. It is allowed to cool to room temperature and solvent is removed under reduced pressure. The remaining material is diluted with water-ether and enough 5% sodium hydroxide solution is added to bring the pH to 10. The aqueous and organic layers are separated and the aqueous layer is extracted with ether. The extracts are washed sequentially with 5% sodium hydroxide solution, 2.5% aqueous formic acid and saturated sodium chloride solution, then dried over anhydrous sodium sulfate. Upon solvent removal, an oil remains which is taken into ether. Then n-hexane is added until the solution becomes turbid. Charcoal is added and the mixture is filtered. Solvent is removed under reduced pressure to yield an oil which crystallizes upon standing. Recrystallization from acetone-water gives pure 5,6-dihydro-3-methoxy-8-[3-(2-methyl-1,3-dioxocyclopent-2-yl)prop-1-en-2-yl]isoquinoline, which is identical to the product obtained in Example 9 A.

WORKUP

后处理

  1. temperatureThe resulting homogeneous solution is heated at about 135° for 4 3/4 hours
  2. customsolvent is removed under reduced pressure
  3. additionThe remaining material is diluted with water-ether and enough 5% sodium hydroxide solution
  4. additionis added
  5. customThe aqueous and organic layers are separated
  6. extractionthe aqueous layer is extracted with ether
  7. washThe extracts are washed sequentially with 5% sodium hydroxide solution, 2.5% aqueous formic acid and saturated sodium chloride solution
  8. dry with materialdried over anhydrous sodium sulfate
  9. customUpon solvent removal
  10. additionThen n-hexane is added until the solution
  11. additionCharcoal is added
  12. filtrationthe mixture is filtered
  13. customSolvent is removed under reduced pressure
  14. customto yield an oil which
  15. customcrystallizes
  16. customRecrystallization from acetone-water