HRID66706

反应详情

EQUATION

反应方程式

HRID 66706 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

PROCEDURE

实验过程

A solution-suspension of 1.4 g (5.34 mmol) of bis(4-methoxyphenyl)phosphine-oxide in 18 mL of toluene was treated under argon with 3.35 g (2.5 mL, 25 mmol) of trichlorosilane in one portion. This resulted in moderate heat and gas evolution and led to complete solution of the phosphine oxide. The mixture was heated at 90° for 5 h, whereupon the clear colorless solution was cooled to 0°. With vigorous stirring, 8.0 mL of 2 N aqueous sodium hydroxide solution (16 mmol) was added slowly while cooling the mixture in an ice-bath to moderate the vigorous reaction. When all the sodium hydroxide had been added, the mixture was allowed to warm to room temperature and stirred vigorously until all solid dissolved (30-90 min), leaving two clear, colorless liquid phases. The layers were allowed to separate and the toluene layer was drawn off under argon via a cannula. The aqueous layer was extracted with 2×20 mL of toluene. The combined toluene extracts were dried (deoxygenated brine and sodium sulfate), filtered, and stripped of solvent on the rotary evaporator at 80°/5 mm Hg to give 1.11 g (84.5%) of crude product. The thick oil was distilled by bulb to bulb distillation at 115°-135°/0.02 mm Hg for 1 h to give 0.747 g (57%) of bis-(4-methoxyphenyl)phosphine as a colorless thick oil which shortly crystallized to colorless, slightly greasy crystals.

WORKUP

后处理

  1. customThis resulted
  2. temperaturein moderate heat
  3. temperatureThe mixture was heated at 90° for 5 h, whereupon the clear colorless solution
  4. temperaturewas cooled to 0°
  5. temperaturewhile cooling the mixture in an ice-bath
  6. customthe vigorous reaction
  7. dissolutiondissolved (30-90 min)
  8. customleaving two clear
  9. customto separate
  10. extractionThe aqueous layer was extracted with 2×20 mL of toluene
  11. dry with materialThe combined toluene extracts were dried
  12. custom(deoxygenated brine and sodium sulfate)
  13. filtrationfiltered
  14. customstripped of solvent on the rotary evaporator at 80°/5 mm Hg
  15. customto give 1.11 g (84.5%) of crude product
  16. distillationThe thick oil was distilled by bulb to bulb distillation at 115°-135°/0.02 mm Hg for 1 h