Vinyl Chloride → Vinyl Chloride

Participants

Reaction Conditions

Reaction Steps

A 2.5-L autoclave was charged with 830 g of deionized water, 750 g of vinyl chloride monomer, 6.8 g of 3 wt % potassium persulfate, and 75 g of an aqueous sodium dodecylbenzenesulfonate solution having a concentration of 5 wt % (0.50 parts by weight based on the monomer), and by raising the temperature to 66° C., emulsion polymerization was initiated. The temperature was kept at 66° C. and when 60 minutes passed after the initiation of polymerization, 270 g of an aqueous sodium dodecylbenzenesulfonate solution having a concentration of 5 wt % (1.80 parts by weight based on the monomer) was continuously added over 360 minutes. After the pressure in the autoclave at 66° C. was reduced to 0.7 MPa, unreacted vinyl chloride monomer was recovered and to the residue, 15 g of an aqueous potassium laurate solution having a concentration of 5 wt % (0.10 parts by weight based on the monomer) was additionally added to obtain a vinyl chloride resin latex (amounts of sodium dodecylbenzenesulfonate and potassium laurate, per 100 parts by weight of vinyl chloride homopolymer: 2.56 parts by weight and 0.11 parts by weight, respectively). The average particle diameter was measured and found to be 0.1 μm.

Provenance & Evidence